首页> 外文期刊>Energy Reports >Intermediate pressure reboiling in geothermal flash plant for increased power production and more effective non-condensable gas abatement
【24h】

Intermediate pressure reboiling in geothermal flash plant for increased power production and more effective non-condensable gas abatement

机译:地热闪光灯中的中间压力再燃料增加功率生产和更有效的不可凝聚气体减排

获取原文
       

摘要

Non-condensable gases (NCG) in condensing geothermal flash plants have negative effects as they reduce heat transfer and thus deteriorate vacuum in condenser. Therefore, it is necessary to evacuate the condenser by vacuum pumps which substantially increases the parasitic load of the plant. Furthermore, NCG consist mostly of COsub2/sub and Hsub2/subS, gases for which methods of abatement are being searched for. In such case, further compressors or blowers are usually required to push the gas through absorption systems. Alternative methods of NCG separation consider a reboiler upstream of a turbine. This process is however connected with significant loss of steam enthalpy, moreover the NCG in high content have also certain work potential. Therefore, this method is often not considered as very perspective. We are proposing a novel solution where the turbine is split in two parts at high and low pressure. The splitting point is at a pressure right above an ambient pressure, wherein a reboiler is placed. By doing so the NCG stream is easily obtained without energy penalty of vacuum pumps, without decreasing turbine admission parameters, and also utilizes its pressure potential. This stream is thus easily ready for processing and subsequent COsub2/sub separation and conditioning. Condensed water is from large part turned back to steam in the cold side of reboiler which gives further work in low pressure turbine with achievable lower backpressure and therefore potential for higher power production. Another advantage of this method is liquid phase elimination from the turbine thus achieving higher turbine efficiency.
机译:冷凝地热闪光厂的不可冷凝气体(NCG)具有负效应,因为它们减少了热传递,因此在冷凝器中劣化了真空。因此,必须通过真空泵疏散冷凝器,这基本上增加了植物的寄生载量。此外,NCG主要由CO 2 和H 2 s,用于搜索削减方法的气体。在这种情况下,通常需要进一步的压缩机或鼓风机来通过吸收系统推动气体。 NCG分离的替代方法考虑了涡轮机上游的再沸器。然而,该过程与蒸汽焓的显着损失相连,此外,高含量的NCG也具有某些工作潜力。因此,这种方法通常不被视为非常透视。我们正在提出一种新的解决方案,其中涡轮机在高压和低压下两部分分开。分裂点处于高于环境压力的压力,其中放置了再沸器。通过这样做,因此在没有真空泵的能量损失的情况下容易获得NCG流,而不会降低涡轮机进入参数,并且还利用其压力势。因此,该流可以容易地准备好处理和随后的CO 2 分离和调节。冷凝水从大部分转回再沸器的冷侧的蒸汽,这在低压涡轮机中进一步加工,可实现的低压涡轮机,因此具有更高的功率生产的可能性。该方法的另一个优点是来自涡轮机的液相消除,从而实现更高的涡轮机效率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号