首页> 外文期刊>Advances in Mechanical Engineering >Simulation of cavitation performance of an axial flow pump with inlet guide vanes:
【24h】

Simulation of cavitation performance of an axial flow pump with inlet guide vanes:

机译:入口导向叶片轴流泵空化性能模拟:

获取原文
获取外文期刊封面目录资料

摘要

The cavitation performance of an axial flow pump with inlet guide vanes for different flow rates is studied in this article. The effects of inlet guide vanes on pump hydraulic performance and cavitation are investigated, where the total vapor fraction of impeller zone (Ftv) is calculated to predict the critical net positive suction head, which is compared with that predicted by efficiency criterion for different flow rates. The influences of the development of cavitation on internal flow in impeller zone are also investigated. The results obtained show that the cavitation performance of axial flow pump can be improved at off-design flow conditions by adjusting angles of inlet guide vanes to positive values at low flow rates and by regulating angles of inlet guide vanes to negative values at high flow rates. As the net positive suction head decreases, the vapor fraction first increases slowly and then increases greatly, clearly presenting cavitation process from inception to full development, which can be ...
机译:在本文中研究了具有入口导向叶片的轴流泵的空化性能。研究了入口导向叶片对泵液体性能和空化的影响,其中计算叶轮区(FTV)的总蒸汽分数以预测临界净正抽吸头,与不同流量率的效率标准预测的临界净正抽吸头。还研究了对叶轮区内部流动开发的影响。得到的结果表明,通过以低流速调节入口导向叶片的角度,可以通过调节入口导向叶片的角度,并通过以高流速调节入口导向叶片的正值来改善轴流泵的空化性能。 。随着净正抽头的降低,蒸气馏分首先增加缓慢,然后大大增加,显然将空化过程从成立到全面发展,这可以是......

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号