首页> 外文期刊>Journal of Clinical and Diagnostic Research >Evaluation of Single File Systems Reciproc, Oneshape, and WaveOne using Cone Beam Computed Tomography ?An In Vitro Study
【24h】

Evaluation of Single File Systems Reciproc, Oneshape, and WaveOne using Cone Beam Computed Tomography ?An In Vitro Study

机译:使用锥形束计算机断层扫描技术评估单文件系统往复式,Oneshape和WaveOne的体外研究

获取原文
           

摘要

Background: Successful endodontic therapy depends on many factor, one of the most important step in any root canal treatment is root canal preparation. In addition, respecting the original shape of the canal is of the same importance; otherwise, canal aberrations such as transportation will be created. Aim: The purpose of this study is to compare and evaluate Reciprocating WaveOne ,Reciproc and Rotary Oneshape Single File Instrumentation System On Cervical Dentin Thickness, Cross Sectional Area and Canal Transportation on First Mandibular Molar Using Cone Beam Computed Tomography. Materials and Methods: Sixty Mandibular First Molars extracted due to periodontal reason was collected from the Department of Oral and Maxillofacial. Teeth were prepared using one rotary and two reciprocating single file system. Teeth were divided into 3 groups 20 teeth in each group. Pre instrumentation and Post instrumentation scans was done and evaluated for three parameters Canal Transportation, Cervical Dentinal Thickness, Cross-sectional Area. Results were analysed statistically using ANOVA, Post-Hoc Tukey analysis. Results: The change in cross-sectional area after filing showed significant difference at 0mm, 1mm, 2mm and 7mm (p<0.001, p =0.006, 0.004 & <0.001 respectively). There was significant difference between wave one and oneshape, oneshape and reciproc at 0mm, 1mm, 2mm & 7mm (p-values for waveone and Oneshape <0.001, 0.022, 0.011 & <0.001 resp. and for oneshape and reciproc < 0.001, p= 0.011, p=0.008 & <0.001).On assessing the transportation of the three file system over a distance of 7 mm (starting from 0mm and then evaluation at 1mm, 2mm, 3mm, 5mm and 7mm), the results showed a significant difference among the file systems at various lengths (p= 0.014, 0.046, 0.004, 0.028, 0.005 & 0.029 respectively). Mean value of cervical dentinal removal is maximum at all the levels for oneshape and minimum for waveone showing the better quality of waveone and reciproc over oneshape file system. Significant difference was found at 9mm, 11mm and 12mm between all the three file systems (p<0.001,< 0.001, <0.001). Conclusion: It was concluded that reciprocating motion is better than rotary motion in all the three parameters Canal Transportation, Cross-sectional Area, Cervical Dentinal Thickness.
机译:背景:成功的牙髓治疗取决于许多因素,任何根管治疗中最重要的步骤之一就是根管准备。另外,尊重运河的原始形状同样重要。否则,将产生运河畸变,例如运输。目的:本研究的目的是使用锥形束计算机断层扫描技术比较和评估往复式WaveOne,往复式和旋转Oneshape单文件仪器系统在第一颌骨磨牙上的宫颈牙本质厚度,横截面积和运河运输的情况。材料与方法:从口腔颌面科收集由于牙周原因而提取的60个下颌第一磨牙。使用一个旋转和两个往复式单锉刀系统制备牙齿。牙齿分为3组,每组20颗。进行仪器前和仪器后扫描,并评估以下三个参数:运河运输,子宫颈厚度,横截面积。使用ANOVA,事后Tukey分析对结果进行统计分析。结果:锉刀后的横截面积变化在0mm,1mm,2mm和7mm处显示出显着差异(分别为p <0.001,p = 0.006、0.004和<0.001)。波形1和波形1,波形和倒数在0mm,1mm,2mm和7mm之间存在显着差异(波形和波形1的p值<0.001、0.022、0.011和<0.001以及波形和倒数的p值<0.001,p = 0.011,p = 0.008&<0.001)在评估三个文件系统在7毫米(从0毫米开始,然后在1毫米,2毫米,3毫米,5毫米和7毫米处进行评估)的传输时,结果显示出显着差异文件系统中的文件长度各不相同(分别为p = 0.014、0.046、0.004、0.028、0.005和0.029)。在一个形状的所有水平上,子宫颈的平均去除率最高,而在波形形状上的最小值最小,这表明波形形状和往复形状的质量优于单一形状文件系统。在所有三个文件系统之间,在9mm,11mm和12mm处发现了显着差异(p <0.001,<0.001,<0.001)。结论:得出结论,在运河运输,横截面积,子宫颈厚度等三个参数中,往复运动均优于旋转运动。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号