...
首页> 外文期刊>The Astrophysical journal >The Navy Prototype Optical Interferometer
【24h】

The Navy Prototype Optical Interferometer

机译:海军原型光学干涉仪

获取原文

摘要

We describe the Navy Prototype Optical Interferometer (NPOI), a joint project of the Naval Research Laboratory (NRL) and the US Naval Observatory (USNO) in cooperation with Lowell Observatory. The NPOI has recently begun operations at the Lowell Observatory site near Flagstaff, Arizona, obtaining its first images, of a binary star, in 1996 May and June and its first limb-darkening observations during 1996 November to 1997 February. This paper gives an overview of the NPOI, including the characteristics of optical interferometry that affect its design. The NPOI includes subarrays for imaging and for astrometry. The imaging subarray consists of six moveable 50 cm siderostats feeding 12 cm apertures, with baseline lengths from 2.0 to 437 m. The astrometric subarray consists of four fixed 50 cm siderostats feeding 12 cm apertures (35 cm apertures to be installed in 1998), with baseline lengths from 19 m to 38 m. The shared back end covers 450-850 nm in 32 channels. The NPOI features vacuum feed and delay systems, active group-delay fringe tracking, and a high degree of automation. The astrometric subarray also includes an extensive site laser metrology system to measure the motions of the siderostats with respect to one another and to the bedrock. For imaging stellar surfaces, arrays with equal spacing between elements are superior to arrays that have been laid out to optimize (u, v) coverage and that therefore have unequal spacing. The imaging subarray of the NPOI provides a number of equally spaced configurations with linear scales at ratios of ≈ 1.64. Unequally spaced configurations are available for a variety of other imaging programs. Coherence across either type of imaging configuration is maintained by "phase bootstrapping": the phases on the longest baselines, on which fringes may be too weak to track, are stabilized by tracking fringes on the shortest baselines. In principle, the four elements of the astrometric subarray provide enough independent baselines to solve for stellar positions and the array geometry simultaneously while observing each of 11 stars only once. The anticipated magnitude limit is 7 mag or better with 12 cm apertures and average seeing; with 35 cm apertures, we expect the limit to be one or more magnitudes fainter. The anticipated wide-angle astrometric precision of the NPOI is ≈ 2 mas. The best angular resolution of the imaging subarray will be ≈ 200 μas. Our experience with the Mark III interferometer suggests that we will be able to measure stellar diameters as small as 200 μas with 1% precision and binary star separations as small as ρ ≈ 65 μas (for Δm ≈ 0 mag) or ρ ≈ 200 μas (for Δm ≈ 3-4 mag). With its large bandwidth and phase bootstrapping, the imaging subarray should be able to make images 10 resolution elements across the disks of nearby late-type stars.
机译:我们描述了海军原型光学干涉仪(NPOI),这是海军研究实验室(NRL)和美国海军天文台(USNO)与洛厄尔天文台合作的共同项目。 NPOI最近在亚利桑那州弗拉格斯塔夫附近的洛厄尔天文台站点开始运作,于1996年5月和6月获得了第一颗双星恒星图像,并于1996年11月至1997年2月获得了第一次变黑观测。本文概述了NPOI,包括影响其设计的光学干涉仪的特性。 NPOI包括用于成像和天文测量的子阵列。成像子阵列由六个可移动的50 cm恒速仪组成,它们提供12 cm的孔径,基线长度为2.0至437 m。天文子阵列由四个固定的50 cm恒速仪组成,它们提供12 cm的孔(将于1998年安装35 cm的孔),基线长度为19 m至38 m。共享的后端在32个通道中覆盖450-850 nm。 NPOI具有真空馈送和延迟系统,主动组延迟条纹跟踪以及高度自动化的功能。天体测量子阵列还包括一个扩展的现场激光计量系统,用于测量恒速器相对于彼此以及相对于基岩的运动。为了对恒星表面进行成像,在元素之间具有相等间距的阵列要优于已布局以优化(u,v)覆盖率且因此间距不相等的阵列。 NPOI的成像子阵列可提供许多等间距的配置,其线性比例为≈1.64。不等间距的配置可用于多种其他成像程序。通过“相位自举”可维持两种类型成像配置之间的相干性:最长基线上的条纹可能太弱而无法跟踪,因此可以通过跟踪最短基线上的条纹来稳定相位。原则上,天文子阵列的四个元素提供了足够的独立基线,可以同时求解恒星位置和阵列几何形状,同时仅观测一次11颗恒星。预期的震级极限为7 mag或更好,孔径为12 cm且视线平均。孔径为35厘米的情况下,我们希望极限值是一个或多个微弱等级。 NPOI的预期广角天文精度为≈2 mas。成像子阵列的最佳角分辨率为≈200μas。我们在Mark III干涉仪上的经验表明,我们将能够以1%的精度测量小至200μas的恒星直径,以及小至ρ≈65μas(对于Δm≈0 mag)或ρ≈200μas(对于Δm≈3-4 mag)。凭借其大带宽和相位自举,成像子阵列应该能够使附近的晚型恒星盘上的图像分辨率达到10个分辨率。
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号