...
首页> 外文期刊>Sensors >SAD-Based Stereo Vision Machine on a System-on-Programmable-Chip (SoPC)
【24h】

SAD-Based Stereo Vision Machine on a System-on-Programmable-Chip (SoPC)

机译:可编程芯片系统(SoPC)上基于SAD的立体视觉机器

获取原文
   

获取外文期刊封面封底 >>

       

摘要

This paper, proposes a novel solution for a stereo vision machine based on the System-on-Programmable-Chip (SoPC) architecture. The SOPC technology provides great convenience for accessing many hardware devices such as DDRII, SSRAM, Flash, etc., by IP reuse. The system hardware is implemented in a single FPGA chip involving a 32-bit Nios II microprocessor, which is a configurable soft IP core in charge of managing the image buffer and users' configuration data. The Sum of Absolute Differences (SAD) algorithm is used for dense disparity map computation. The circuits of the algorithmic module are modeled by the Matlab-based DSP Builder. With a set of configuration interfaces, the machine can process many different sizes of stereo pair images. The maximum image size is up to 512 K pixels. This machine is designed to focus on real time stereo vision applications. The stereo vision machine offers good performance and high efficiency in real time. Considering a hardware FPGA clock of 90 MHz, 23 frames of 640 × 480 disparity maps can be obtained in one second with 5 × 5 matching window and maximum 64 disparity pixels.
机译:本文提出了一种基于可编程芯片系统(SoPC)架构的立体视觉机器的新颖解决方案。 SOPC技术为通过IP重用访问许多硬件设备(例如DDRII,SSRAM,闪存等)提供了极大的便利。系统硬件在单个FPGA芯片中实现,该芯片包含一个32位Nios II微处理器,该微处理器是可配置的软IP内核,负责管理图像缓冲区和用户的配置数据。绝对差之和(SAD)算法用于密集视差图计算。算法模块的电路由基于Matlab的DSP Builder建模。通过一组配置接口,机器可以处理许多不同尺寸的立体声对图像。最大图像尺寸最大为512 K像素。该机器旨在专注于实时立体视觉应用。立体视觉机器实时提供良好的性能和高效率。考虑到90 MHz的硬件FPGA时钟,可以在1秒内获得5×5匹配窗口和最多64个视差像素的23帧640×480视差图。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号