首页> 外文期刊>Sensors >Fabrication of a Microbial Biosensor Based on QD-MWNT Supports by a One-Step Radiation Reaction and Detection of Phenolic Compounds in Red Wines
【24h】

Fabrication of a Microbial Biosensor Based on QD-MWNT Supports by a One-Step Radiation Reaction and Detection of Phenolic Compounds in Red Wines

机译:一步辐射反应制备基于QD-MWNT的微生物生物传感器并检测红酒中的酚类化合物

获取原文
           

摘要

An Acaligense sp.-immobilized biosensor was fabricated based on QD-MWNT composites as an electron transfer mediator and a microbe immobilization support by a one-step radiation reaction and used for sensing phenolic compounds in commercial red wines. First, a quantum dot-modified multi-wall carbon nanotube (QD-MWNT) composite was prepared in the presence of MWNT by a one-step radiation reaction in an aqueous solution at room temperature. The successful preparation of the QD-MWNT composite was confirmed by XPS, TEM, and elemental analysis. Second, the microbial biosensor was fabricated by immobilization of Acaligense sp. on the surface of the composite thin film of a glassy carbon (GC) electrode, which was prepared by a hand casting method with a mixture of the previously obtained composite and Nafion solution. The sensing ranges of the microbial biosensor based on CdS-MWNT and Cu2S-MWNT supports were 0.5–5.0 mM and 0.7–10 mM for phenol in a phosphate buffer solution, respectively. Total concentration of phenolic compounds contained in commercial red wines was also determined using the prepared microbial immobilized biosensor.
机译:一种基于QD-MWNT复合材料的Acaligense sp。固定生物传感器,该电子传感器通过一步辐射反应作为电子传递介质和微生物固定载体,用于感测商业红酒中的酚类化合物。首先,在室温下在水溶液中通过一步辐射反应在MWNT存在下制备量子点改性的多壁碳纳米管(QD-MWNT)复合材料。 XPS,TEM和元素分析证实了QD-MWNT复合材料的成功制备。第二,微生物生物传感器是通过固定Acaligense sp。在玻璃碳(GC)电极的复合薄膜的表面上,该电极是通过手工浇铸法与先前获得的复合物和Nafion溶液的混合物制备的。基于CdS-MWNT和Cu 2 S-MWNT支持物的微生物传感器在磷酸盐缓冲溶液中对苯酚的传感范围分别为0.5-5.0 mM和0.7-10 mM。还使用制备的微生物固定化生物传感器确定了商业红酒中所含酚类化合物的总浓度。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号