首页> 外文期刊>MATEC Web of Conferences >Two-step Aging Treatment in Ultra-High-Strength Al-Zn-Mg-Cu Aluminum Alloy
【24h】

Two-step Aging Treatment in Ultra-High-Strength Al-Zn-Mg-Cu Aluminum Alloy

机译:超高强度Al-Zn-Mg-Cu铝合金的两步时效处理

获取原文
           

摘要

The parameters of duplex aging treatment of pre-stretched plates including both the temperature and the holding time of two aging stages have been systematically investigated by using electric conductivity and tensile properties tests, exfoliation corrosion experiments and TEM observations. The results show that both the first and the second age have effect on properties of plates after having been performed by different duplex aging treatments and the effect of the second age is much greater. It is found that such a duplex aging treatment is appropriate in which the temperature of the second age is 155°C and the holding time of the first and the second age is 4-6 and 28-32 hours, respectively. The ultimate strength of specimens treated with the duplex aging treatment given above can achieve 540MPa while electric conductivity is 40.5-42 %IACS.
机译:通过电导率和拉伸性能测试,剥离腐蚀实验和TEM观察,系统地研究了预拉伸板的双时效处理参数,包括温度和两个时效阶段的保持时间。结果表明,在通过不同的双工时效处理后,第一和第二时效对板的性能都有影响,第二时效的影响要大得多。已经发现,这样的双重时效处理是合适的,其中第二龄期的温度为155℃,并且第一龄期和第二龄期的保持时间分别为4-6小时和28-32小时。经过上述双相时效处理的试样的极限强度可以达到540MPa,而电导率为40.5-42%IACS。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号