首页> 外文期刊>Journal of Thermal Engineering >Performance Analysis and Thermodynamic Modeling of a Poly Generation System by Integrating a Multi-Effect-Desalination Thermo-Vapor Compression (MED-TVC) System with a Combined Cooling, Heating and Power (CCHP) System
【24h】

Performance Analysis and Thermodynamic Modeling of a Poly Generation System by Integrating a Multi-Effect-Desalination Thermo-Vapor Compression (MED-TVC) System with a Combined Cooling, Heating and Power (CCHP) System

机译:通过将多效淡化热蒸汽压缩(MED-TVC)系统与冷却,加热和动力(CCHP)组合系统相集成的方式,对多联产发电系统进行性能分析和热力学建模

获取原文
           

摘要

In the present study, performance analysis of a multi effect distillation with thermos vapor compressor (MED-TVC) desalination system coupled to a combined cooling, heating and power (CCHP) system with gas turbine prime mover has been carried out to cogeneration of cooling, heating, power and potable water. The system incorporates air compressor, combustion chamber, gas turbine, triple pressure heat recovery system generator (HRSG), absorption chiller and MED-TVC. A thermodynamic modeling based on mass and energy balance equations is applied for each component of the integrated system. The engineering equation solver (EES) software was used for modeling. It is found that the efficiency of the integrated system reached to 84% (the efficiency of the gas turbine cycle was 32%). Furthermore, a parametric study has been presented in order to investigate the effects of the operational parameters on the performance of the integrated system.
机译:在本研究中,已对带有热水蒸汽压缩机(MED-TVC)脱盐系统的多效蒸馏系统与燃气轮机原动机组合的冷热电联产(CCHP)系统相结合进行了热分析,供暖,电力和饮用水。该系统包括空气压缩机,燃烧室,燃气轮机,三压热回收系统发生器(HRSG),吸收式冷却器和MED-TVC。基于质量和能量平衡方程的热力学建模应用于集成系统的每个组件。使用工程方程求解器(EES)软件进行建模。发现集成系统的效率达到84%(燃气轮机循环的效率为32%)。此外,为了研究操作参数对集成系统性能的影响,已经进行了参数研究。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号