Prediction of Nongaseous Fission Products Behavior in the Primary Cooling System of High Temperature Gas-Cooled Reactor

摘要

In high temperature gas-cooled reactors (HTGRs), some amounts of fission products (FPs) are released mainly from fuel with failed coatings and are transported in the primary cooling system with the primary coolant during normal operation. In that case, condensable FPs plateout on the inner surface of components in the primary cooling system. On the other hand, since the HTGRs use helium gas as primary coolant, the primary coolant is not activated itself and very small amount of corrosion products is generated. Then, γ-ray emitted from the FPs becomes main source in shielding design of the HTGRs, and not only release amount from fuel but also plateout distributions of the FPs should be properly evaluated. Therefore, prediction of plateout behavior in the primary cooling system of HTGRs was carried out based on the calculation result of plateout distribution in High Temperature Engineering Test Reactor. Before the calculation, analytical model was verified by comparison with experimentally obtained plateout distributions and the applicability of the model to predict the plateout distributions in the primary cooling system of HTGR was certified.This report describes the predicted result of plateout distribution in the primary cooling system of HTGR together with the verification result of the analytical model.