首页> 外文期刊>Journal of Chemical Engineering of Japan >Surface Tensions of trans-1,3,3,3-Tetrafluoropropene and trans-1,3,3,3-Tetrafluoropropene+Difluoromethane Mixture
【24h】

Surface Tensions of trans-1,3,3,3-Tetrafluoropropene and trans-1,3,3,3-Tetrafluoropropene+Difluoromethane Mixture

机译:反式1,3,3,3-四氟丙烯和反式1,3,3,3-四氟丙烯+二氟甲烷混合物的表面张力

获取原文
           

摘要

References(13) Cited-By(9) The surface tensions of trans-1,3,3,3-tetrafluoropropene (HFO-1234ze(E)) alone and when mixed with difluoromethane (HFC-32) were measured using the differential capillary-rise method. Twenty-three data points for HFO-1234ze(E) were obtained in the temperature range 273–333 K. Twenty-six data points for the 50.00 mass% HFO-1234ze(E)+50.00 mass% HFC-32 mixture were obtained in the temperature range from 273–323 K. The experimental uncertainty of the surface tension was estimated to be 0.2 mN m−1 for pure HFO-1234ze(E) and 0.3 mN m−1 for the fluid mixture. Based on the obtained data, the surface tension correlations for HFO-1234ze(E) and the HFO-1234ze(E)+HFC-32 mixture were formulated. The correlations can represent the data with a standard deviation of 0.06 mN m–1 for HFO-1234ze(E) and 0.18 mN m−1 for the HFO-1234ze(E)+HFC-32 mixture.
机译:参考文献(13)被引用的文献(9)使用差动毛细管分别测量了反式1,3,3,3-四氟丙烯(HFO-1234ze(E))和与二氟甲烷(HFC-32)混合时的表面张力上升方法。在273–333 K的温度范围内获得了23个HFO-1234ze(E)的数据点。在55%的HFO-1234ze(E)+50.00质量%的HFC-32混合物中获得了26个数据点。温度范围为273–323 K.对于纯HFO-1234ze(E),表面张力的实验不确定性估计为0.2 mN m-1,混合液为0.3 uncertaintymN m-1。基于获得的数据,制定了HFO-1234ze(E)和HFO-1234ze(E)+ HFC-32混合物的表面张力相关性。相关性可以表示数据,对于HFO-1234ze(E),标准偏差为0.06 mN m-1;对于HFO-1234ze(E)+ HFC-32混合物,标准偏差为0.18 mN m-1。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号