首页> 外文期刊>The Journal of Engineering >Coplanar waveguide-fed ultra-wideband antenna with triple-band notched design
【24h】

Coplanar waveguide-fed ultra-wideband antenna with triple-band notched design

机译:具有三频槽口设计的共面波导馈电超宽带天线

获取原文
           

摘要

A novel coplanar waveguide-fed ultra-wideband antenna with triple band-notched function centred at 3.5, 5.5 and 7.5 GHz is proposed. It has small size of 26 ?? 26 mm2. This antenna consists of an elliptical radiator and a square ground plane with an elliptical slot on one side of the substrate. Besides, two circles with a radius of 2 mm were dug from the edge of the outer ellipse to realise the bandwidth requirement. To avoid interference from Worldwide Interoperability for Microwave Access, a single open-ended elliptical arc-shaped slot was etched on the top side of the ground. Moreover, another elliptical arc-shaped slot notched at wireless local area network band was etched on the elliptical radiator and two systemically C-shaped slots working at 7.3a??7.7 GHz was embedded on the structure. Measured voltage standing wave ratio shows the working frequency range was from 3.1 to 13.5 GHz except for notched bands of 3.35a??3.8, 5.1a??5.9 and 7.35a??7.8 GHz.
机译:提出了一种新型的共面波导馈电超宽带天线,该天线具有以3.5、5.5和7.5 GHz为中心的三频带陷波功能。它的体积小26 ?? 26平方毫米该天线由椭圆形辐射器和正方形接地平面组成,该平面在基板的一侧具有椭圆形缝隙。此外,从外椭圆的边缘挖出两个半径为2 mm的圆,以实现带宽要求。为了避免受到全球微波互通性的干扰,在地面的顶部刻有一个单端椭圆形的弧形槽。此外,在椭圆形辐射器上蚀刻了另一个在无线局域网带上刻有缺口的椭圆形弧形槽,并且在该结构上嵌入了两个工作在7.3a〜7.7 GHz的系统C形槽。测得的电压驻波比表明,除3.35a≤3.8、5.1a≤5.9和7.35a≤7.8GHz的陷波带之外,工作频率范围为3.1至13.5 GHz。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号