...
首页> 外文期刊>Vojnosanitetski Pregled >Effect of surgical drill guide and irrigans temperature on thermal bone changes during drilling implant sites - thermographic analysis on bovine ribs
【24h】

Effect of surgical drill guide and irrigans temperature on thermal bone changes during drilling implant sites - thermographic analysis on bovine ribs

机译:手术钻引导器和灌肠温度对钻孔植入部位热骨骼变化的影响-牛肋骨的热成像分析

获取原文

摘要

Background/Aim. During drilling implant sites, mechanical energy is converted into thermal one resulting in transient rise in temperature of surrounding bone. The temperature of 47°C exeeding one minute impairs osseointegration, compromises mechanical properties of the local bone and could cause early implant failure. This in vitro study aimed to assess the effect of surgical drill guide and temperature of irrigans on thermal changes of the local bone during drilling implant sites, and to test the influence of irrigans temperature on the temperature of surgical drill guide. Methods. A total of 48 specimens obtained from bovine ribs were randomly allocated to four experimental conditions according to the 2 x 2 factorial design: drill guide (with or without) and saline (at 25°C or 5°C). Real-time infrared thermography was used as a method for temperature measurement. The primary outcome was bone temperature change during drilling implant sites measured at 3 osteotomy depths, whereas the second one was change in the temperature of the drill guide. Data were analyzed by Brunner and Langer nonparametric analysis and Wilcoxon test. Results. The effect of drill guide on the changes of bone temperature was significant at the entrance of osteotomy, whereas the effect of saline temperature was significant at all osteotomy levels (p 0.05). Guided surgery and irrigation with saline at 25°C were associated with the highest bone temperature increase. Increase in drill guide temperature was significantly higher when saline at 25°C was used (p < 0.001). Conclusion. Guided implant site preparation generates higher temperature of the local bone than conventional drilling, not exceeding the threshold for thermal bone necrosis. Although saline at room temperature provides sufficient heat control during drilling, cooled saline is more effective regardless the use of surgical drill guide.
机译:背景/目标。在植入物钻孔期间,机械能转换为热能,从而导致周围骨骼的温度瞬时升高。在47°C的温度下持续一分钟会损害骨整合,损害局部骨骼的机械性能,并可能导致早期植入失败。这项体外研究旨在评估手术钻导向器和开孔器温度对钻孔植入部位局部骨热变化的影响,并测试开孔器温度对手术钻子导向器温度的影响。方法。根据2 x 2因子设计,将总共48个从牛肋骨中获得的标本随机分配到四个实验条件下:钻探引导器(带或不带)和盐水(25°C或5°C)。实时红外热成像法用作温度测量方法。主要结果是在3个截骨深度处测量的钻孔植入部位的骨温变化,而第二个结果是钻具导向器温度的变化。数据通过Brunner和Langer非参数分析以及Wilcoxon检验进行分析。结果。在切骨术的入口处,导钻器对骨温变化的影响显着,而在所有切骨术水平下,盐水温度的影响均显着(p 0.05)。在25°C的指导下进行手术和盐水冲洗与最高的骨温升高有关。当使用25°C的盐水时,钻机导向温度的升高明显更高(p <0.001)。结论。引导的植入物部位准备工作比常规钻孔产生的局部骨骼温度更高,不会超过热性骨坏死的阈值。尽管室温下的盐水可在钻井过程中提供足够的热量控制,但无论使用外科手术钻具引导装置,冷却后的盐水更有效。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号