...
首页> 外文期刊>Turkish journal of chemistry >Synthesis of Na-, Fe-, and Co-promoted TiO$_{2}$/multiwalled carbon nanotube composites and their use as a photocatalyst
【24h】

Synthesis of Na-, Fe-, and Co-promoted TiO$_{2}$/multiwalled carbon nanotube composites and their use as a photocatalyst

机译:Na,Fe和Co促进的TiO $ _ {2} $ /多壁碳纳米管复合材料的合成及其作为光催化剂的用途

获取原文

摘要

The use of multiwalled carbon nanotubes (CNTs) in sol-gel synthesized titanium dioxide (TiO$_{2})$ photocatalysts as templates was systematically studied. CNTs have high oxidative thermal stability and the controlled removal of CNTs can be achieved at lower temperatures under air flow by the use of Na, Fe, and Co as a catalyst. These catalysts helped to reduce the oxidation temperature of CNTs; thus anatase phase was achieved without significant sintering. The use of a promoter, heat treatment, and various heat treatment atmospheres was effective in specific surface area, crystallinity, and photocatalytic activity against methylene blue (MB) degradation. While the specific surface area of bare TiO$_{2}$ was 22 m$^{2}$/g, after templating surface areas as high as 191 m$^{2}$/g were obtained. For the photocatalytic characterization, with bare TiO$_{2}$, the rate constant for MB decomposition was 0.81 h$^{-1}$, and for CNT-TiO$_{2}$ it was 1.31 h$^{-1}$. Moreover, after Na promotion, the rate constant increased to 1.85 h$^{-1}$. The results showed that CNTs can be used as a template to tailor and improve the textural properties. Moreover, as a novel material, the Na promotion in CNT-TiO$_{2}$ samples showed the best photocatalytic activity by enhancing the interaction between TiO$_{2}$ and CNT surfaces.
机译:系统研究了多壁碳纳米管在溶胶-凝胶法合成的二氧化钛(TiO $ _ {2})$光催化剂中的应用。 CNT具有较高的氧化热稳定性,通过使用Na,Fe和Co作为催化剂,可以在较低的温度和气流下实现CNT的受控去除。这些催化剂有助于降低碳纳米管的氧化温度。因此,无需大量烧结就可以实现锐钛矿相。使用促进剂,热处理和各种热处理气氛在比表面积,结晶度和对亚甲基蓝(MB)降解的光催化活性方面有效。裸露的TiO $ _ {2} $的比表面积为22 m $ ^ {2} $ / g,而模板化后的表面积高达191 m $ ^ {2} $ / g。对于光催化表征,使用裸露的TiO $ _ {2} $,MB分解的速率常数为0.81 h $ ^ {-1} $,而对于CNT-TiO $ _ {2} $则为1.31 h $ ^ { -1} $。此外,Na提升后,速率常数增加到1.85 h $ ^ {-1} $。结果表明,碳纳米管可以用作模板,以剪裁和改善质感。此外,作为新型材料,碳纳米管中的Na促进剂通过增强TiO $ {{2} $}与CNT表面之间的相互作用而表现出最佳的光催化活性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号