...
首页> 外文期刊>Tropical Journal of Pharmaceutical Research >Effect of polymer ratio on the quality of a co-processed excipient of prosopis gum and crab shell chitosan
【24h】

Effect of polymer ratio on the quality of a co-processed excipient of prosopis gum and crab shell chitosan

机译:聚合物比例对丙香胶和蟹壳壳聚糖共加工辅料质量的影响

获取原文
   

获取外文期刊封面封底 >>

       

摘要

Purpose: To assess the effect of polymer ratio on the quality of a novel co-processed excipient of prosopis gum and crab shell chitosan. Methods: The physicochemical properties (DSC thermogram, powder flow properties, porosity and swelling index as well as pH, viscosity and adhesive strength of 2 % w?v dispersions) of prosopis gum, chitosan and the three grades of co-processed excipient of prosopis gum and crab shell chitosan (Prosochit? 201, Prosochit? 101 and Prosochit? 102) were determined. Results: The three grades of the co-processed excipient of prosopis gum and crab shell chitosan (Prosochit?) were characterized by one endothermic transition each with peaks at 180 o C, 179 o C and 178 o C for Prosochit?201, Prosochit?101 and Prosochit?102 respectively. Flow properties increased with increase in proportion of chitosan. The porosity of the three grades of the new excipient was not significantly different from that of prosopis gum. Swelling indices of prosopis gum, chitosan, Prosochit? 201, Prosochit? 101 and Prosochit? 102 were 1135.53%, 14.00%, 726.33%, 677.33% and 514.00% respectively. The viscosity also decreased with increase in the proportion of chitosan. The new excipient had higher adhesive strength compared to the individual constituents (prosopis gum and crab shell chitosan). Conclusion: Prosochit? is superior to its individual constituents as a tableting excipient but its suitability for liquid formulation is reduced by increase in the proportion of chitosan.
机译:目的:评估聚合物比例对新型共加工的丙泊松胶和蟹壳壳聚糖辅料质量的影响。方法:异丙酚胶,壳聚糖和三种等级的前列腺素共加工赋形剂的理化性质(DSC热谱图,粉末流动性,孔隙度和溶胀指数以及pH,粘度和2%wwv分散体的粘合强度)确定树胶和蟹壳壳聚糖(Prosochit?201,Prosochit?101和Prosochit?102)。结果:Prosopis胶和蟹壳壳聚糖(Prosochit?)的三种共加工的赋形剂的特征是一个吸热转变,Prosochit?201,Prosochit?的峰值分别在180 o C,179 o C和178 oC。 101和Prosochit?102。流动性随壳聚糖比例的增加而增加。三种等级的新赋形剂的孔隙率与前列腺素胶的孔隙率没有显着差异。 Prosopis胶,壳聚糖,Prosochit的膨胀指数? 201,Prosochit? 101和Prosochit? 102个分别为1135.53%,14.00%,726.33%,677.33%和514.00%。粘度也随着壳聚糖比例的增加而降低。与单独的成分(前列腺素胶和蟹壳壳聚糖)相比,新的赋形剂具有更高的粘合强度。结论:前言?作为片剂赋形剂,它比其单独的成分优越,但由于壳聚糖的比例增加,其对液体制剂的适用性降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号