首页> 外文期刊>The Journal of Advanced Prosthodontics >An investigation into the effect of denture adhesives on incisal bite force of complete denture wearers using pressure transducers - a clinical study
【24h】

An investigation into the effect of denture adhesives on incisal bite force of complete denture wearers using pressure transducers - a clinical study

机译:利用压力传感器研究义齿胶粘剂对全口义齿佩戴者的切牙力的影响-临床研究

获取原文
           

摘要

PURPOSE Study was conducted to determine and assess the effect of different type of denture adhesives on the incisal bite force of complete denture wearers until the dislodgement of upper denture, using pressure transducer. MATERIALS AND METHODS 30 patients out of 100 were included in the study. Based on the Kapur's method of scoring denture retention and stability, these patients were divided into 3 groups- Group A - Clinically good dentures; Group B - Clinically fair dentures; and Group C - Clinically poor dentures. A custom made occlusal force meter was constructed based on the load cell type of pressure transducers. Different adhesives (powder, paste and adhesive strips) were used in the study. Complete denture wearers were asked to bite on the load cell and the readings of incisal bite force were recorded. The readings of incisal bite force were subjected to statistical analysis using Repeated measures ANOVA followed by post-hoc bonferroni test. RESULTS The result suggests that denture adhesives improved the incisal bite force of complete denture wearers significantly The incisal bite force (in kg) in Group A without using adhesives, with powder adhesive, with paste adhesive and with adhesive strips was found to be 2.48 (± 0.16), 3.43 (± 0.11), 6.01 (± 0.11), 3.22 (± 0.09) respectively. The incisal bite force (in kg) in Group B without using adhesives, with powder adhesive, with paste adhesive and with adhesive strips was found to be 1.87 (± 0.18), 3.35 (± 0.14), 5.34 (± 0.18), 3.21 (± 0.12) respectively. The incisal bite force (in kg) in Group C without using adhesives, with powder adhesive, with paste adhesive and with adhesive strips was found to be 1.00 (± 0.17), 3.07 (± 0.14), 4.37 (± 0.26), 2.99 (± 0.14) respectively. CONCLUSION Within the limitations of the study, it was concluded that the use of denture adhesive was found to be significantly effective in improving the incisal bite force of complete dentures until the dislodgement of upper denture. Fittydent paste adhesive was found to be more effective than the powder and strips adhesives. The improvement in incisal bite force was found to be higher in Group C in comparison to that of Group A and Group B.
机译:目的使用压力传感器进行研究,以确定和评估不同类型的义齿粘合剂对完整义齿佩戴者的切牙咬合力直至上义齿移位的影响。材料与方法本研究纳入了100名患者中的30名患者。根据Kapur评分义齿固位和稳定性的方法,将这些患者分为3组-A组-临床上良好的假牙; B组-临床上义齿假牙; C组-临床不良的假牙。基于压力传感器的称重传感器类型,构造了定制的咬合力计。在研究中使用了不同的胶粘剂(粉状,糊状和胶条状)。要求完全的义齿佩戴者在测力传感器上进行咬合,并记录切牙咬合力的读数。使用重复测量方差分析(ANOVA),然后进行事后bonferroni测试,对切牙咬合力的读数进行统计分析。结果结果表明,义齿粘合剂显着改善了全口义齿佩戴者的切牙咬合力。A组中不使用粘合剂,粉末粘合剂,糊状粘合剂和粘合条的切牙咬合力(kg)为2.48(± 0.16),3.43(±0.11),6.01(±0.11),3.22(±0.09)。不使用粘合剂,使用粉末粘合剂,使用糊状粘合剂和使用粘合条的B组的切向咬合力(kg)为1.87(±0.18),3.35(±0.14),5.34(±0.18),3.21( ±0.12)。在C组中不使用粘合剂,使用粉末粘合剂,使用糊状粘合剂和使用粘合剂条的切向咬合力(kg)为1.00(±0.17),3.07(±0.14),4.37(±0.26),2.99( ±0.14)。结论在研究范围内,得出的结论是,使用义齿胶粘剂可有效地改善完整义齿的切牙咬合力,直至上义齿脱落。发现Fittydent糊状粘合剂比粉末状和条状粘合剂更有效。与A组和B组相比,C组切齿咬合力的改善更高。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号