Errors in quantitative T1rho imaging and the correction methods

摘要

The spin-lattice relaxation time constant in rotating frame (T1rho) is useful for assessment of the properties of macromolecular environment inside tissue. Quantification of T1rho is found promising in various clinical applications. However, T1rho imaging is prone to image artifacts and quantification errors, which remains one of the greatest challenges to adopt this technique in routine clinical practice. The conventional continuous wave spin-lock is susceptible to B₁ radiofrequency (RF) and B₀ field inhomogeneity, which appears as banding artifacts in acquired images. A number of methods have been reported to modify T1rho prep RF pulse cluster to mitigate this effect. Adiabatic RF pulse can also be used for spin-lock with insensitivity to both B₁ RF and B₀ field inhomogeneity. Another source of quantification error in T1rho imaging is signal evolution during imaging data acquisition. Care is needed to affirm such error does not take place when specific pulse sequence is used for imaging data acquisition. Another source of T1rho quantification error is insufficient signal-to-noise ratio (SNR), which is common among various quantitative imaging approaches. Measurement of T1rho within an ROI can mitigate this issue, but at the cost of reduced resolution. Noise-corrected methods are reported to address this issue in pixel-wise quantification. For certain tissue type, T1rho quantification can be confounded by magic angle effect and the presence of multiple tissue components. Review of these confounding factors from inherent tissue properties is not included in this article.