...
首页> 外文期刊>Plant Production Science >Enhancing the Performance of Direct Seeded Fine Rice by Seed Priming
【24h】

Enhancing the Performance of Direct Seeded Fine Rice by Seed Priming

机译:通过拌种提高直接播种优质稻的性能

获取原文
           

摘要

Higher water requirements and increasing labor costs are the major problems of the traditional rice production system. Direct seeded rice culture, growing rice without standing water, can be an attractive alternate. However, poor emergence and seedling establishment, and weed infestation are the main hindrances in the adoption of this culture. An attempt to improve the performance of direct seeded rice by seed priming was made in the present study. Priming tools employed were traditional soaking (soaking in tap water up to radicle protrusion), hydropriming for 48 h, osmohardening with KCl or CaCl2 (osmotic potential of ’ –1.25 MPa) for 24 h, vitamin priming (ascorbate 10 ppm) for 48 h and seed hardening for 24 h. All the priming techniques improved crop stand establishment, growth, yield and quality except traditional soaking, which resulted in impaired germination and seedling establishment that ended in reduced kernel yield and lower harvest index than that of control. Early and synchronized germination was accompanied by enhanced amylase activity and total sugars. Osmohardening with CaCl2 resulted in the best performance, followed by hardening and osmohardening with KCl. Osmohardening with CaCl2 produced 2.96 t ha-1 (vs 2.11 t ha-1 from untreated control) kernel yield, 10.13 t ha-1 (vs 9.35 t ha-1 from untreated control) straw yield and 22.61% (vs 18.91% from untreated control) harvest index. Mean emergence time and emergence to heading days, germination percentage and panicle bearing tillers; plant height and straw yield, 1000-kernel weight and kernel yield, α-amylase activity and total sugars, kernel proteins and kernel water absorption were correlated positively.
机译:更高的需水量和增加的人工成本是传统大米生产系统的主要问题。直接播种水稻文化,无需停水即可种植水稻,可能是一种有吸引力的替代方法。但是,出苗率和幼苗生长差以及杂草侵扰是采用这种文化的主要障碍。本研究试图通过引种改良稻直播性能。使用的底涂工具包括传统的浸泡(在自来水中浸泡直至胚根突出),加氢底涂48小时,用KCl或CaCl2渗透硬化(渗透压为–1.25 MPa)24小时,维生素底涂(抗坏血酸10 ppm)48小时种子硬化24小时。除传统的浸泡方式外,所有引发方法均改善了农作物的定植,生长,产量和质量,从而导致发芽和幼苗定植受损,最终导致籽粒产量下降,收成指数低于对照。早期和同步发芽伴随着增强的淀粉酶活性和总糖。用CaCl2渗透硬化处理可获得最佳性能,然后用KCl进行硬化和渗透硬化处理。用CaCl2进行渗透硬化可产生2.96 t ha-1(相对于未经处理的对照为2.11 t ha-1)的籽粒产量,10.13 t ha-1(相对于未经处理的对照为9.35 t ha-1)的秸秆产量和22.61%(相对于18.91 %)来自未经处理的对照)收获指数。平均出苗时间和出穗日的出苗率,发芽率和穗分pan;株高和秸秆产量,1000粒重和籽粒产量,α-淀粉酶活性与总糖,籽粒蛋白质和籽粒吸水率呈正相关。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号