首页> 外文期刊>Revista IBRACON de Estruturas e Materiais >Evaluating the applicability of rheometry in steel fiber reinforced self-compacting concretes
【24h】

Evaluating the applicability of rheometry in steel fiber reinforced self-compacting concretes

机译:评价流变学在钢纤维增强自密实混凝土中的适用性

获取原文
           

摘要

The use of self-compacting concrete in civil construction industry presents various advantages, since the material shows adequate workability during fresh state. When fiber reinforcement is used, there are changes in its behavior that require attention. This study aimed to evaluate the applicability of rheological tests and the correlation between its results and those obtained with regular tests used to control SCCs. In that sense, different mixtures of SCC with different steel fiber contents were produced in order to be analyzed in the experimental program described. Rotational rheology tests and slump flow and L-box tests were performed. The results showed that slump flow test did not present good correlations with rheological parameters. On the other hand, this test was able to point out the risk of segregation of the mixtures with higher fiber contents. A good correlation was obtained between the L-box test results and rheological parameters. The L-box was also able to show loss in the passing ability of SCC related to the rise of plastic viscosity and yield stress. These tests also presented a good correlation with the rheological parameters when lower fiber contents were used. Although the rheometry test was unable to evaluate these problems, this kind of test gave more objective and reliable data on variations in rheological parameters related to the increase of fiber content, and proved to be a more reliable test to this kind of application, especially when applied together with the conventional tests.
机译:自密实混凝土在民用建筑行业中的使用具有多种优势,因为该材料在新鲜状态下显示出足够的可加工性。使用纤维增强材料时,其行为会有变化,需要引起注意。这项研究旨在评估流变学测试的适用性以及其结果与用于控制SCC的常规测试获得的结果之间的相关性。从这个意义上说,生产了具有不同钢纤维含量的SCC不同混合物,以便在所述实验程序中进行分析。进行了旋转流变学测试,坍落度测试和L箱测试。结果表明坍落流动试验与流变参数没有很好的相关性。另一方面,该测试能够指出具有较高纤维含量的混合物偏析的风险。 L箱测试结果与流变参数之间具有良好的相关性。 L-盒也能够显示出与塑性粘度和屈服应力的升高有关的SCC通过能力的损失。当使用较低的纤维含量时,这些测试还表现出与流变参数的良好相关性。尽管流变测试无法评估这些问题,但这种测试提供了与纤维含量增加相关的流变参数变化的更客观可靠的数据,并被证明是对这种应用的更可靠的测试,尤其是当与常规测试一起使用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号