...
首页> 外文期刊>Multidisciplinary Respiratory Medicine >Instant velocity and consistency of emitted cloud change by the different levels of canister filling with Metered Dose Inhalers (MDIs), but not with Soft Mist Inhalers (SMIs): a?bench study
【24h】

Instant velocity and consistency of emitted cloud change by the different levels of canister filling with Metered Dose Inhalers (MDIs), but not with Soft Mist Inhalers (SMIs): a?bench study

机译:基准研究通过不同剂量的药罐吸入器(MDI)填充不同水平的罐子来改变所发射云的瞬时速度和一致性,但不是通过软雾吸入器(SMI)进行:

获取原文
   

获取外文期刊封面封底 >>

       

摘要

BackgroundInhalation is the preferred route for respiratory drug delivery, but several factors contribute to the variability of the respirable dose fraction. Instant velocity and the dynamic characteristics of the droplet cloud represent crucial factors. Aim was to measure and compare the instant velocity and the consistency of emitted cloud from five different MDIs (A - Salbutamol sulphate 100mcg, GSK; B - Salbutamol sulphate 100mcg, Valeas; C - Salmeterol xinafoate/Fluticasone propionate 25/125mcg, GSK; D - Formoterol fumarate/Bechlomethasone propionate 6/100mcg, Chiesi; E - Formoterol fumarate/Fluticasone dipropionate 5/125mcg, Mundipharma) and one SMI (Tiotropium bromide 5mcg, Boehringer Ingelheim), at different distance from the nozzle and canister filling. MethodsMeasurements were made at 90, 50, and 10% of canister filling, and at 5, 10, and 20?cm from the nozzle, for a total of 972 puffs. A high speed video photography protocol was adopted and high speed cameras (1.200 frames/sec.) were used. Data were acquired by means of specialized softwares. Temperature, humidity, and vibrations occurrence were strictly controlled during measurements. Statistics: Anova and p ResultsMDIs generated different Instant velocities: MDI B generated the highest, while MDI A the lowest. As expected, velocity decreased in proportion to the distance from the nozzle. Except with MDI C, instant velocity decreased significantly over the first 50% of canister emptying, but dropped by >33% at 90% of emptying with all other MDIs ( p p p p p p =?ns) with SMI. All MDIs had a very fast jet phase, ranging 0.01–0.03?s at 10?cm, and 0.03–0.05?s at 20?cm from the nozzle, without any significant difference from each other ( p =?ns). MDIs generated a cloud similarly tight ( p =?ns) at 10 and 20?cm from the nozzle, while it was extremely wider and constant with the SMI ( p =?0–001). Also the cloud turbulence was minimized during the SMI emission. Discussion and ConclusionsMDIs are characterized by a substantial variability in both their instant velocity and consistency of the emitted cloud at different levels of canister filling. SMI generates a much slower soft mist cloud which is constantly homogeneous and independent of canister emptying. These peculiarities assessed at bench are suggesting a higher dose consistency and a much more effective therapeutic performance also in real life.
机译:背景技术吸入是呼吸道给药的首选途径,但是有几个因素导致可吸入剂量分数的变化。瞬时速度和液滴云的动态特性是关键因素。目的是测量和比较来自五个不同MDI的瞬时速度和散发云的一致性(A-硫酸沙丁胺醇100mcg,GSK; B-沙丁胺醇硫酸盐100mcg,Valeas; C-沙美特罗xinafoate /丙酸氟替卡松25 / 125mcg,GSK; D -富马酸福莫特罗/丙酸倍氯米松6 / 100mcg,基耶西; E-富马酸福莫特罗/二丙酸氟替卡松5 / 125mcg,Mundipharma)和一种SMI(噻托溴铵5mcg,勃林格殷格翰),其距喷嘴和罐灌装的距离不同。方法在罐填充量的90%,50%和10%处以及距喷嘴5、10和20?cm处进行测量,总共972次抽吸。采用了高速视频摄影协议,并使用了高速相机(1.200帧/秒)。数据是通过专用软件获取的。测量期间严格控制温度,湿度和振动的发生。统计:方差分析和p结果MDI产生不同的瞬时速度:MDI B产生最高,而MDI A最低。正如预期的那样,速度与距喷嘴的距离成比例地降低。除使用MDI C之外,在使用SMI的所有其他MDI(pp p p p p p =?ns)中,在罐排空的前50%内,瞬时速度显着下降,但在排空90%时,瞬时速度下降了> 33%。所有MDI的喷射阶段都非常快,在距喷嘴10?cm处的射流相位范围为0.01-0.03?s,在距喷嘴20?cm处的范围为0.03-0.05?s,彼此之间没有显着差异(p =?ns)。 MDI在距喷嘴10和20?cm处产生类似的致密云(p =?ns),而在SMI的作用下,云则非常宽且恒定(p =?0–001)。另外,在SMI排放期间,云湍流也被最小化。讨论和结论MDI的特点是在不同的罐填充水平下,其即时速度和发射云的一致性都存在很大差异。 SMI生成的软雾云要慢得多,它始终是均匀的,并且与罐的排空无关。在实验台上评估的这些特性表明,在现实生活中,剂量一致性更高,治疗效果也更有效。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号