...
首页> 外文期刊>Materials science >Al2O3 nano-particle reinforced aluminium matrix composites through stir casting technique
【24h】

Al2O3 nano-particle reinforced aluminium matrix composites through stir casting technique

机译:Al2O3纳米颗粒增强铝基复合材料的搅拌铸造技术

获取原文
           

摘要

2014 aluminium alloy metal matrix composites (AMMCs) reinforced with Al2O3 nano-particles (ANP) were fabricated using stir casting technique. The volume fraction of ANP varied between 0.5 and 1.5 vol%. The compressive deformation behaviour of these composites was investigated as a function of ANP content at different temperatures and strain rates. Scanning Electron Microscope observations revealed uniform dispersion ofANP in the matrix. Strong bonding betweenANP and the matrix was also observed. The yield strength, and ultimate compressive strength increased with increase inANP content, and decreasedwith increase in test temperature. The compressive deformation behaviour wasmarginally influenced by strain rate. Work softening behaviour of the composite was observed at high temperature, which was caused due to dynamic recrystallization and strain aging.
机译:使用搅拌铸造技术制备了用Al2O3纳米颗粒(ANP)增强的2014铝合金金属基复合材料(AMMC)。 ANP的体积分数在0.5和1.5体积%之间变化。研究了这些复合材料在不同温度和应变速率下的压缩变形行为与ANP含量的关系。扫描电子显微镜观察显示ANP在基质中均匀分散。还观察到ANP与基质之间的牢固结合。屈服强度和极限抗压强度随ANP含量的增加而增加,随测试温度的升高而降低。压缩变形行为受应变率的影响很小。在高温下观察到复合材料的工作软化行为,这是由于动态再结晶和应变时效引起的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号