首页> 外文期刊>Natural Gas Industry B >A new method for calculating gas content of coal reservoirs with consideration of a micro-pore overpressure environment
【24h】

A new method for calculating gas content of coal reservoirs with consideration of a micro-pore overpressure environment

机译:考虑微孔超压环境的煤储层瓦斯含量计算新方法

获取原文
           

摘要

When the gas content of a coal reservoir is calculated, the reservoir pressure measured by well logging and well testing is generally used for inversion calculation instead of gas pressure. However, the calculation result is not accurate because the reservoir pressure is not equal to the gas pressure in overpressure environments. In this paper, coal samples of different ranks in Shanxi and Henan are collected for testing the capillary pressure of coal pores. Based on the formation process of CBM reservoirs and the hydrocarbon generation and expulsion history of coal beds, the forming mechanisms of micro-pore overpressure environments in coal reservoirs were analyzed. Accordingly, a new method for calculating the gas content of coal reservoirs with consideration of a micro-pore overpressure environment was developed. And it was used to calculate the gas content of No. 1 coal bed of the 2nd member of Lower Permian Shanxi Fm in the Zhongmacun Coal Mine in Jiaozuo, Henan. It is indicated that during the formation and evolution of coals, some solid organic matters were converted into gas and water, and gas–water contact is surely formed in pores. In the end, capillary pressure is generated, so the gas pressure in micro-pores is much higher than the hydrostatic column pressure, which results in a micro-pore overpressure environment. Under such an environment, gas pressure is higher than reservoir pressure, so the gas content of coal reservoirs calculated previously based on the conventional reservoir pressure evaluation are usually underestimated. It is also found that the micro-pore overpressure environment exerts a dominating effect on the CBM content calculation of 3–100?nm pores, especially that of 3–10?nm pores, but a little effect on that of pores >100?nm. In conclusion, this new method clarifies the pressure environment of CBM gas reservoirs, thereby ensuring the calculation accuracy of gas content of coal reservoirs.
机译:在计算储气库的瓦斯含量时,通常将通过测井和试井测得的储气库压力代替瓦斯压力用于反演计算。但是,由于储层压力不等于超压环境下的气体压力,因此计算结果不准确。本文收集了山西和河南不同等级的煤样,以测试煤孔隙的毛细压力。根据煤层气储层的形成过程以及煤层的生烃和排烃历史,分析了煤层微孔超压环境的形成机理。因此,开发了一种考虑微孔超压环境计算储气库瓦斯含量的新方法。并用于计算河南焦作市中马村煤矿下二叠统山西组二段1号煤层的瓦斯含量。研究表明,在煤的形成和演化过程中,一些固体有机物被转化为气体和水,并且在孔隙中确实形成了气水接触。最后,会产生毛细管压力,因此微孔中的气压远高于静水柱压力,这会导致微孔超压环境。在这样的环境下,瓦斯压力要高于储层压力,因此通常会低估根据常规储层压力评估结果事先计算出的煤储层中的瓦斯含量。还发现,微孔超压环境对3–100?nm孔,尤其是3–10?nm孔的CBM含量计算起主要作用,但对大于100?nm的孔的CBM含量影响不大。 。综上所述,该新方法阐明了煤层气气藏的压力环境,从而保证了煤层气含气量的计算精度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号