首页> 外文期刊>Minerals >Micropore Structural Heterogeneity of Siliceous Shale Reservoir of the Longmaxi Formation in the Southern Sichuan Basin, China
【24h】

Micropore Structural Heterogeneity of Siliceous Shale Reservoir of the Longmaxi Formation in the Southern Sichuan Basin, China

机译:四川盆地南部龙马溪组硅质页岩储层微孔结构非均质性

获取原文
           

摘要

In recent years, the shale gas in the southern Sichuan Basin has achieved great commercial development, and the Silurian Longmaxi Formation is the main development stratum. In order to solve the problems of great difference production and inaccurate gas content of the Longmaxi Formation shale gas field in the southern Sichuan Basin, based on thin section identification, argon ion polishing-field emission scanning electron microscopy, high pressure mercury injection, low temperature nitrogen adsorption and the fractal method, the micropore structural heterogeneity of the siliceous shale reservoir of the Longmaxi Formation has been studied. The results show the following: The pores of siliceous shale are mainly intergranular pores and organic pores. Image analysis shows that there are obvious differences in size and distribution of shale pores among different types. The micropore structural heterogeneity is as follows: intragranular pore intergranular pore organic pore. In the paper, the combination of low temperature nitrogen adsorption method and high-pressure mercury injection method is proposed to characterize the micropore size distribution and fractal dimension, which ensures the credibility of pore heterogeneity. The shale pores are mainly composed of mesopores (2–20 nm), followed by macropores (100–300 nm). For different pore sizes, the fractal dimension from large to small is mesopore, micropore and macropore. Shale pore structure and fractal dimension are correlated with mineral composition and total organic carbon (TOC) content, but the correlation is significantly different in different areas, being mainly controlled by the sedimentary environment and diagenesis.
机译:近年来,四川盆地南部的页岩气已取得了巨大的商业开发,志留系龙马溪组是主要的开发地层。为解决四川盆地南部龙马溪组页岩气田产量差异大,含气量不准确的问题,基于薄片识别,氩离子抛光场发射扫描电镜,高压注汞,低温等技术,解决了该问题。利用氮气吸附和分形方法研究了龙马溪组硅质页岩储层的微孔结构非均质性。结果表明:硅质页岩的孔隙主要为粒间孔隙和有机孔隙。图像分析表明,不同类型页岩孔隙的大小和分布存在明显差异。微孔结构异质性为:粒内孔>粒间孔>有机孔。本文提出了低温氮气吸附法和高压汞注入法相结合的方法来表征微孔尺寸分布和分形维数,从而确保了孔隙异质性的可信度。页岩孔隙主要由中孔(2–20 nm)组成,其次是大孔(100–300 nm)。对于不同的孔径,从大到小的分形维数是中孔,微孔和大孔。页岩孔隙结构和分形维数与矿物成分和总有机碳(TOC)含量相关,但不同地区的相关性明显不同,主要受沉积环境和成岩作用控制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号