首页> 外文期刊>Materials Research >Influence of CaO Addition, FeO/SiO 2 , and MgO/SiO 2 on the Melting Characteristic Temperatures of FeO-SiO 2 -MgO-CaO System
【24h】

Influence of CaO Addition, FeO/SiO 2 , and MgO/SiO 2 on the Melting Characteristic Temperatures of FeO-SiO 2 -MgO-CaO System

机译:CaO,FeO / SiO 2和MgO / SiO 2对FeO-SiO 2 -MgO-CaO体系熔融特性温度的影响

获取原文
       

摘要

In order to decrease the oxidation temperature of fayalite in molten nickel slags, the influence of CaO addition, FeO/SiO 2 , and MgO/SiO 2 on melting characteristic temperatures of FeO-SiO 2 -MgO-CaO system were investigated. The melting characteristic temperatures, including softening temperature ( T s ), hemispherical temperature ( T h ), and flow temperature ( T f ),were measured with hot stage microscope. Experimental results showed that the melting characteristic temperatures first decreased sharply and then increased slowly with increasing w (CaO) for samples at given FeO/SiO 2 and MgO/SiO 2 ratios. The melting characteristic temperatures of samples without CaO addition were much higher than that of samples with different CaO addition, which was mainly caused by the phase components at different compositions. The variation of melting characteristic temperatures were described in detail. Phase components and liquid fractions were calculated by FactSage 7.1, which was good agreement with the XRD patterns.
机译:为了降低熔融镍渣中铁橄榄石的氧化温度,研究了CaO的添加,FeO / SiO 2和MgO / SiO 2对FeO-SiO 2 -MgO-CaO体系熔融特征温度的影响。用热台显微镜测量熔融特征温度,包括软化温度(T s),半球温度(T h)和流动温度(T f)。实验结果表明,在给定的FeO / SiO 2和MgO / SiO 2比例下,样品的熔融特征温度先急剧下降,然后随着w(CaO)的增加而缓慢上升。没有添加CaO的样品的熔融特征温度要比添加不同CaO的样品的熔融特征温度高得多,这主要是由于组成不同的相成分引起的。详细描述了熔融特征温度的变化。通过FactSage 7.1计算了相成分和液体分数,这与XRD图谱非常吻合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号