首页> 外文期刊>Frontiers in Marine Science >Effects of higher CO2 and temperature on exopolymer particle content and physical properties of marine aggregates
【24h】

Effects of higher CO2 and temperature on exopolymer particle content and physical properties of marine aggregates

机译:较高的CO2和温度对海洋聚合物骨料中外聚合物颗粒含量和物理性能的影响

获取原文
           

摘要

We investigated how future ocean conditions, and specifically the interaction between temperature and CO2, might affect marine aggregate formation and physical properties. Initially, mesocosms filled with coastal seawater were subjected to three different treatments of CO2 concentration and temperature: 1) 750 ppm CO2, 16°C, 2) 750 ppm CO2, 20°C, and 3) 390 ppm CO2, 16°C. Diatom-dominated phytoplankton blooms were induced in the mesocosms by addition of nutrients. In aggregates produced in roller tanks using seawater taken from the mesocosms during different stages of the bloom, we measured sinking velocity, size, chlorophyll a, particulate organic carbon and nitrogen, and exopolymer particle content; excess density and mass were calculated from the sinking velocity and size of the aggregates. As has been seen in previous experiments, no discernable differences in overall nutrient uptake, chlorophyll-a concentration, or exopolymer particle concentrations could be related to the acidification treatment in the mesocosms. In addition, in the aggregates formed during the roller tank experiments, we observed no statistically significant differences in chemical composition among the treatments during Pre-Bloom, Bloom, and Post-Bloom periods. However, physical characteristics were different and showed a synergistic effect of warmer temperature and higher CO2 during the Pre-Bloom period; at this time, temperature had a larger effect than CO2 on aggregate sinking velocity. In roller tank experiments with warmer and acidified treatment (future conditions), aggregates were larger, heavier and settled faster than aggregates formed at present-day or only acidified conditions. During the Post Bloom, however, aggregates formed under present and future conditions had similar physical properties. In acidified tanks at ambient temperature, aggregates were slower, smaller and less dense than those formed at the same temperature but under present CO2 or under warmer and acidified conditions. Thus, the sinking velocity of aggregates formed in acidified tanks at ambient temperature was slower than the other two cases. Our findings point out the potential of ocean acidification and warming to modify physical properties of sinking aggregates but also emphasize the need of future experiments investigating multiple environmental stressors to clarify the importance of each factor.
机译:我们研究了未来的海洋状况,尤其是温度与CO2之间的相互作用如何影响海洋聚集体的形成和物理特性。最初,对充满沿海海水的中观进行了两种不同的CO2浓度和温度处理:1)750 ppm CO2,16°C,2)750 ppm CO2,20°C,和3)390 ppm CO2,16°C。通过添加营养物质,在介体中诱导了以硅藻为主的浮游植物水华。在滚筒水箱中,使用从开花期间不同阶段的中膜吸收的海水生产的骨料中,我们测量了沉降速度,尺寸,叶绿素a,有机碳和氮颗粒以及外聚合物颗粒含量。从沉没速度和聚集体的尺寸计算出过量的密度和质量。如先前实验中所见,总营养素吸收,叶绿素a浓度或外聚合物颗粒浓度之间没有明显的差异可能与中膜的酸化处理有关。此外,在滚筒试验期间形成的聚集体中,我们观察到在开花前,开花和开花后时期的处理之间,化学成分没有统计学上的显着差异。然而,在预花期,物理特性有所不同,并表现出较高的温度和较高的CO2的协同作用。此时,温度对总沉降速度的影响比CO2大。在辊箱实验中,在较温暖和酸化的条件下(未来条件),聚集体比目前或仅在酸化条件下形成的聚集体更大,更重且沉降更快。但是,在布卢姆后期,在当前和未来条件下形成的聚集体具有相似的物理性质。在环境温度下酸化的储罐中,骨料比在相同温度下但在目前的CO2或在温暖和酸化的条件下形成的骨料更慢,更小且密度更低。因此,在环境温度下在酸化池中形成的聚集体的沉降速度比其他两种情况要慢。我们的研究结果指出了海洋酸化和变暖可能改变沉没聚集体的物理特性,但同时也强调了未来需要研究多个环境压力因素以阐明每个因素重要性的实验。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号