首页> 外文期刊>Energies >Re-Industrialisation and Low-Carbon Economy—Can They Go Together? Results from Stakeholder-Based Scenarios for Energy-Intensive Industries in the German State of North Rhine Westphalia
【24h】

Re-Industrialisation and Low-Carbon Economy—Can They Go Together? Results from Stakeholder-Based Scenarios for Energy-Intensive Industries in the German State of North Rhine Westphalia

机译:再工业化与低碳经济—它们可以走在一起吗?德国北莱茵-威斯特法伦州能源密集型行业的基于利益相关者的方案的结果

获取原文
           

摘要

The German federal state of North Rhine-Westphalia (NRW) is home to one of the most important industrial regions in Europe, and is the first German state to have adopted its own Climate Protection Law (CPL). This paper describes the long-term (up to 2050) mitigation scenarios for NRW’s main energy-intensive industrial sub-sectors which served to support the implementation of the CPL. It also describes the process of scenario development, as these scenarios were developed through stakeholder participation. The scenarios considered three different pathways (best-available technologies, break-through technologies, and CO2 capture and storage). All pathways had optimistic assumptions on the rate of industrial growth and availability of low-carbon electricity. We find that a policy of “re-industrialisation” for NRW based on the current industrial structures (assumed here to represent an average growth of NRWs industrial gross value added (GVA) of 1.6% per year until 2030 and 0.6% per year from 2030 to 2050), would pose a significant challenge for the achievement of overall energy demand and German greenhouse gas (GHG) emission targets, in particular as remaining efficiency potentials in NRW are limited. In the best-available technology (BAT) scenario CO2 emission reductions of only 16% are achieved, whereas the low carbon (LC) and the carbon capture and storage (CCS) scenario achieve 50% and 79% reduction respectively. Our results indicate the importance of successful development and implementation of a decarbonised electricity supply and breakthrough technologies in industry—such as electrification, hydrogen-based processes for steel, alternative cements or CCS—if significant growth is to be achieved in combination with climate mitigation. They, however, also show that technological solutions alone, together with unmitigated growth in consumption of material goods, could be insufficient to meet GHG reduction targets in industry.
机译:德国北莱茵-威斯特法伦州(NRW)是欧洲最重要的工业区之一,也是德国第一个通过自己的气候保护法(CPL)的州。本文介绍了北威州主要的能源密集型工业子行业的长期(直至2050年)缓解方案,这些次级行业可用于支持CPL的实施。它还描述了方案开发的过程,因为这些方案是通过利益相关者的参与而开发的。这些场景考虑了三种不同的途径(最佳可用技术,突破性技术以及CO 2 捕获和存储)。所有途径都对工业增长率和低碳电力的可获得性做出了乐观的假设。我们发现,根据当前的产业结构,北威州的“重新工业化”政策(假设此处代表北威州的工业总增加值(GVA)每年平均增长1.6%,到2030年,从2030年开始每年增长0.6%到2050年),这对于实现整体能源需求和德国温室气体(GHG)排放目标将构成重大挑战,特别是因为北威州的剩余效率潜力有限。在最佳可行技术(BAT)方案中,CO 2 排放量仅减少了16%,而低碳(LC)和碳捕集与封存(CCS)方案则分别减少了50%和79分别减少%。我们的结果表明,如果要与减缓气候变化相结合实现显着增长,那么成功开发和实施脱碳电力供应以及工业上的突破性技术(如电气化,钢铁的氢基工艺,替代水泥或CCS)的重要性。但是,它们还表明,仅凭技术解决方案以及原材料消费的强劲增长,不足以实现工业中减少温室气体排放的目标。

著录项

相似文献

  • 外文文献
  • 中文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号