首页> 外文期刊>EFSA Journal >Safety assessment of the process ‘EstPak Plastik’, based on Starlinger Decon technology, used to recycle post‐consumer PET into food contact materials
【24h】

Safety assessment of the process ‘EstPak Plastik’, based on Starlinger Decon technology, used to recycle post‐consumer PET into food contact materials

机译:基于Starlinger Decon技术的“ EstPak Plastik”工艺的安全性评估,该工艺用于将消费后的PET回收到食品接触材料中

获取原文
           

摘要

This scientific opinion of the EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (CEF Panel) deals with the safety evaluation of the recycling process EstPak Plastik (EU register No RECYC150), which is based on the Starlinger Decon technology. The decontamination efficiency of the process was demonstrated by a challenge test. The input of this process is hot caustic washed and dried poly(ethylene terephthalate) (PET) flakes originating from collected post‐consumer PET containers, mainly bottles, containing no more than 5% of PET from non‐food consumer applications. In this technology, washed and dried PET flakes are preheated before being submitted to solid‐state polycondensation (SSP) in a continuous reactor (one single reactor or several reactors in parallel) at high temperature under vacuum and gas flow. Having examined the challenge test provided, the Panel concluded that the preheating (step 2) and the decontamination in the continuous SSP reactor (step 3) are the critical steps that determine the decontamination efficiency of the process. The operating parameters that control the performance of the process are well defined and are temperature, pressure, residence time and gas flow for steps 2 and 3. Under these conditions, it was demonstrated that the recycling process under evaluation, using the Starlinger Decon technology, is able to ensure that the level of migration of potential unknown contaminants into food is below a conservatively modelled migration of 0.1 μg/kg food. Therefore, the Panel concluded that the recycled PET obtained from this process intended to be used up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs for long‐term storage at room temperature, with or without hotfill, is not considered of safety concern. Trays made of this PET are not intended to be used, and should not be used, in microwave and conventional ovens.
机译:EFSA关于食品接触材料,酶,调味剂和加工助剂的专家组(CEF专家组)的科学意见涉及对基于Starlinger Decon技术的回收工艺EstPak Plastik(欧盟注册号RECYC150)的安全性评估。挑战测试证明了该工艺的去污效率。此过程的输入是热碱洗净和干燥的聚对苯二甲酸乙二醇酯(PET)薄片,这些薄片来自收集的消费后PET容器(主要是瓶子),其中非食品消费应用中的PET含量不超过5%。在这项技术中,经过清洗和干燥的PET薄片在真空和气流下于高温下在连续反应器(一个反应器或多个并联的反应器)中进行固态缩聚(SSP)之前进行预热。小组对提供的挑战性试验进行了审查,得出结论认为,预热(步骤2)和连续SSP反应器中的去污(步骤3)是决定工艺去污效率的关键步骤。明确定义了控制过程性能的操作参数,分别是步骤2和步骤3的温度,压力,停留时间和气体流量。在这些条件下,证明了使用Starlinger Decon技术评估了回收过程,能够确保潜在的未知污染物向食品中的迁移水平低于0.1μg/ kg食品的保守模型迁移量。因此,小组得出结论认为,从该工艺中获得的再生PET打算以高达100%的比例用于制造与所有类型的食品接触的材料和物品,以便在室温下(无论是否带有热灌装)长期储存。不考虑安全问题。由这种PET制成的托盘不打算在微波炉和常规烤箱中使用,也不应使用。

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号