首页> 外文期刊>International Journal of Science and Qualitative Analysis >Study on Some Mechanical and Chemical Properties of Agro Residual Briquettes Produced from Date Palm Fronds
【24h】

Study on Some Mechanical and Chemical Properties of Agro Residual Briquettes Produced from Date Palm Fronds

机译:枣棕叶农残渣团块力学性能和化学性质的研究

获取原文
       

摘要

The agricultural crop residuals are considered one of the most important problems, which face the environmental life and farmers in the world. A study was carried out to evaluate the physical characteristics of chopped date palm stalks (fronds and leaflets). These properties are necessary to apply normal design procedures such as pneumatic conveying, fluidization, drying, and combustion. The mechanical treatment by cutting, crushing or chopping and briquetting processes are the primary step and the suitable solution for solving this problem and recycling these residuals to be transformed into useful products. So the aim of the present work to get a high quality for agriculture residues such as date palm stalks (Fronds), date palm leaflets briquettes. The results obtained from measuring the mechanical properties (average shear and compressive strength) for date palm stalks at different moisture content (12.63, 33.21 and 60.54%) was (6.4, 4.7 and 3.21MPa) and (3.8, 3.18 and 2.86MPa) respectively. The modulus of elasticity and toughness were evaluated as a function of moisture content. As the moisture content of the stalk regions increased the modulus of elasticity and toughness decreased indicating a reduction in the brittleness of the stalk regions. Chopped date palm stalks (Palm fronds), date palm leaflets having moisture content (8, 10 and 12%) and (8, 10 and 12.8% w.b.) were dandified into briquettes without binder and with binder (Urea-Formaldehyde) using a screw press machine. Quality properties for briquettes were durability, compression ratio hardness, bulk density, compression ratio, resiliency, water resistance and gases emission. The optimum quality properties found for briquettes at 8% moisture content and without binder. Where the highest compression stress and durability were 8.95, 10.39 MPa and 97.06%, 93.64% for date palm stalks (Palm fronds), date palm leaflets briquettes, respectively. The CO and COsub2/sub emissions for date palm stalks (Fronds), date palm leaflets briquettes were less than these for loose residuals.
机译:农业作物残渣被认为是世界环境和农民面临的最重要问题之一。进行了一项研究,以评估切碎的枣椰子茎(叶和小叶)的物理特性。这些属性对于应用常规设计程序(例如气动输送,流化,干燥和燃烧)是必需的。通过切割,破碎或切碎和压块工艺进行的机械处理是主要步骤,也是解决此问题并将这些残留物循环再转化为有用产品的合适解决方案。因此,本工作的目的是获得高质量的农业残留物,例如枣椰子茎(叶状体),枣椰子小叶团块。通过测量不同含水量(12.63、33.21和60.54%)的枣椰子茎的机械性能(平均剪切强度和抗压强度)获得的结果分别为(6.4、4.7和3.21MPa)和(3.8、3.18和2.86MPa) 。评估弹性模量和韧性与水分含量的关系。随着茎区域的水分含量增加,弹性模量和韧性降低,这表明茎区域的脆性降低。将切碎的枣椰子茎(棕榈叶),水分含量分别为(8%,10%和12%)和(8、10%和12.8%wb)的枣椰子小叶用螺丝钉捣成不含粘合剂和粘合剂(脲醛)的团块。压机。型煤的质量特性为耐久性,压缩比硬度,堆积密度,压缩比,回弹性,耐水性和气体排放。对于含水量为8%且不含粘合剂的团块,发现了最佳的质量特性。其中,枣棕榈茎(棕榈叶)和枣棕榈小叶团的最高压缩应力和耐久性分别为8.95、10.39 MPa和97.06%,93.64%。椰枣茎(叶状体),椰枣小叶团块的CO和CO 2 排放量低于松散残留物的排放量。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号