...
首页> 外文期刊>International Journal of Physical Sciences >Investigation of gravity anomalies in parts of Niger Delta Region in Nigeria using aerogravity data
【24h】

Investigation of gravity anomalies in parts of Niger Delta Region in Nigeria using aerogravity data

机译:利用航空重力数据调查尼日利亚尼日尔三角洲部分地区的重力异常

获取原文
   

获取外文期刊封面封底 >>

       

摘要

Gravity anomalies in parts of the Niger Delta region, Nigeria, were investigated through the interpretation of aerogarvity data with the objectives to determine the thickness of the sedimentary basin, establish the basement topography, density contrasts and the geological models which will give information about variation of geological structures. Four sheets of digital airborne gravity data were used for the study. Source parameter imaging (SPI), Standard Euler deconvolution and forward and inverse modeling techniques were employed in quantitative interpretation. The Bouguer anomaly of the study area varied from -20.0 to 37.7 mGal, while the residual Bouguer anomaly varied from -19.6 to 25.7 mGal. The SPI gave depth values ranging from -539.7 to -4276.0 m for shallow and deep lying gravity anomalous bodies. The windowed Euler-3D for Bouguer gravity result revealed the depth range of 1355.5 to -1518.1 m for structural index of one; 2384.5 to -3283.2 m for structural index of two and 2426.0 to -5011 m for structural index of three. The forward and inverse modeling gave the density values for the modeled profiles 1, 2, 3, 4 and 5 as 1.820, 2.410, 0.720, 2.310 and 2.100 gcm-3, respectively, with their respective depths of 3872, 4228, 4880, 3560 and 2527 m. The results from this study have shown that the depth to basement and density contrast have influence on the petroleum/hydrocarbon accumulation.
机译:通过解释航空重力数据,调查了尼日利亚尼日尔三角洲地区部分地区的重力异常,目的是确定沉积盆地的厚度,建立地下室地形,密度对比和地质模型,这些地质模型将提供有关变化的信息。地质结构。该研究使用了四张数字式航空重力数据。在定量解释中采用了源参数成像(SPI),标准Euler反卷积以及正向和反向建模技术。研究区的布格异常范围从-20.0到37.7 mGal,而剩余的布格异常范围从-19.6到25.7 mGal。对于浅层和深层重力异常体,SPI给出的深度值为-539.7至-4276.0 m。窗口Euler-3D的布格重力结果显示,结构指数为1时,深度范围为1355.5至-1518.1 m。结构指数为2的2384.5至-3283.2 m,结构指数为3的2426.0至-5011 m。正向和逆向建模分别为建模轮廓1、2、3、4和5给出了1.820、2.410、0.720、2.310和2.100 gcm-3的密度值,其深度分别为3872、4228、4880、3560和2527 m。这项研究的结果表明,基底的深度和密度对比对石油/烃的积累有影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号