Generation of Temperature Rise Distribution at Chip of EN31 Steel Due to Primary Deformation Zone during Turning Using MATLAB? and to Study its Machinability Behavior with CVD Carbide Insert

Ajay Goyal

首页> 外文期刊>International Journal of Engineering Trends and Technology >Generation of Temperature Rise Distribution at Chip of EN31 Steel Due to Primary Deformation Zone during Turning Using MATLAB? and to Study its Machinability Behavior with CVD Carbide Insert

【24h】

Generation of Temperature Rise Distribution at Chip of EN31 Steel Due to Primary Deformation Zone during Turning Using MATLAB? and to Study its Machinability Behavior with CVD Carbide Insert

机译：使用MATLAB在车削过程中由于主要变形区而在EN31钢屑处产生的温升分布？并研究CVD硬质合金刀片的切削性能

获取原文

获取外文期刊封面目录资料

开具论文收录证明 >>

文献代查 >>

文献数据库（团队版） >>

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

Temperature rise at chip during machining leads to formation of built up edge, reduced tool life and poor surface finish. In this paper, one of the author’s coding at MATLAB? is modified with small changes to determine temperature rise distribution at chi

机译：加工过程中切屑温度升高会导致积屑瘤的形成，缩短刀具寿命并降低表面光洁度。本文是作者在MATLAB上的编码之一？进行细微的修改以决定温度的分布

著录项

来源
《International Journal of Engineering Trends and Technology》 |2014年第3期|共页
作者
Ajay Goyal;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种
中图分类工业技术;
关键词

相似文献

外文文献
专利

1. On the contribution of primary deformation zone-generated chip temperature to heat partition in machining [J] . M. Fahad, P. T. Mativenga, M. A. Sheikh The International Journal of Advanced Manufacturing Technology . 2013,第1a4期

机译：加工中一次变形区产生的切屑温度对热分配的影响
2. CHAPTER5: EFFECT OF ION IMPLANTATION ON THE RESIDUAL STRESS, TRIBOLOGICAL AND MACHINING BEHAVIOR OF CEMENTED CARBIDE CUTTING TOOL INSERTS COATED WITH TiN BY CVD AND PVD METHODS [J] . Anthony J. Perry, James R. Treglio, Daniel E. Geist Key Engineering Materials . 1998,第期

机译：第5章：离子注入对CVD和PVD法涂覆TiN的硬质合金切削刀具刀片的残余应力，摩擦学和切削性能的影响
3. Study on Chip Breaking Behavior of 3-D Complex Groove Insert in Machining Carbon Constructional Steel at High Cutting Speeds [J] . Huiping Zhang, Zhenjia Li, Erliang Liu, Key Engineering Materials . 2008,第期

机译：高切削速度加工碳素结构钢中3-D复合槽镶件断屑行为的研究
4. Simulation of Substrate Temperature Distribution in Diamond Films Growth on Cemented Carbide Inserts by Hot Filament CVD [C] . W. Zuo, B. Shen, F. H. Sun, International Conference on e-Engineering and Digital Enterprise Technology . 2008

机译：用热丝CVD模拟金刚石薄膜生长的衬底温度分布
5. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。

Generation of Temperature Rise Distribution at Chip of EN31 Steel Due to Primary Deformation Zone during Turning Using MATLAB? and to Study its Machinability Behavior with CVD Carbide Insert

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅