首页> 外文期刊>Innovative Systems Design and Engineering >Effect of retempering with retarding admixture on properties of concrete subjected to prolonged mixing
【24h】

Effect of retempering with retarding admixture on properties of concrete subjected to prolonged mixing

机译:缓凝剂回火对长时间搅拌混凝土性能的影响

获取原文
       

摘要

In situations like delivery of concrete from central mixing plant, in road construction, in constructing lengthy tunnels, in transportation of concrete by manual labor, in hilly terrain long hauling of concrete is required. Loss of workability and undue stiffening of concrete may take place at the time of placing on actual work site1. In such situations engineers at site, many a time reject the concrete partially set and unduly stiffened due to the time elapsed between mixing and placing. Mixed concrete is a costly material and it cannot be wasted without any regard to cost. It is required to see whether such a stiffened concrete could be used on work without undue harm with use of retarding admixtures. The process of remixing of concrete, if necessary, with addition of just the required quantity of water is known as ‘retempering’ of concrete1. Sometimes, a small quantity of extra cement is also added while retempering. In the site sometimes the concrete has to wait for some time to enter in the formwork after it is mixed. This may be due to some break down in the conveyance or quarrel between the labors. In such situations the concrete looses its plasticity. But since the quantity is enormous2, such concrete cannot be wasted. In such situations addition of small quantity of cement and water along with retarding admixture can bring back the plasticity to concrete. Thus retempering becomes important in such odd situations2. In this paper an attempt is made to study the strength characteristics of concrete containing retarding admixture at retempering time of 15min upto 90 min. The tests are conducted to evaluate the strength characteristics of concrete like compressive strength, tensile strength, flexural strength for different retempering times.
机译:在诸如从中央搅拌站输送混凝土,在道路建设中,在建造冗长的隧道中,在通过人工进行混凝土运输中,在丘陵地带中需要长期拖运混凝土的情况下。放置在实际工作现场时,混凝土可能会丧失可加工性和过度硬化。在这种情况下,由于混合和放置之间的时间过长,很多时间现场工程师会拒绝混凝土的部分凝固和过度硬化。混合混凝土是一种昂贵的材料,在不考虑成本的情况下不能浪费。需要查看是否可以在使用缓凝剂的情况下在工作中使用这种硬化混凝土而不会造成不当伤害。必要时仅添加所需量的水而进行的混凝土混合过程称为“混凝土回火” 1。有时,在回火时还会添加少量的额外水泥。在现场,混凝土搅拌后,有时必须等待一段时间才能进入模板。这可能是由于劳力之间的运输或争执发生了故障。在这种情况下,混凝土失去了可塑性。但是由于数量巨大2,这种混凝土不能浪费。在这种情况下,添加少量的水泥和水以及缓凝剂可以恢复混凝土的可塑性。因此,在这种奇怪的情况下,回火变得很重要2。本文尝试研究在15min至90min的回火时间内含缓凝剂的混凝土的强度特性。进行测试以评估不同回火时间下混凝土的强度特性,如抗压强度,抗张强度,抗弯强度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号