Properties of Ready Mixed Acrylic Paste for Exterior Insulation Using Pozzolanic Materials and Atomizing Slag

摘要

Ready mixed acrylic paste (RMAP) is a material used in exterior insulation systems of buildings; it consists of liquids and aggregates. However, it is considerably difficult to use an admixture to control the physical properties of the RMAP owing to problems associated with strength and workability. Thus, to improve the properties of RMAP, this study evaluates the properties of a mortar produced with RMAP as well as pozzolanic materials and atomizing slag, which is a by-product from the steelmaking industry. It was observed that if the density difference is large, a liquid RMAP may experience segregation. Through our experiments, we confirm that segregation resistance could be achieved even at 20% atomizing slag, which has a high density, by increasing the viscosity by approximately 1000 cP through the use of 10% fly ash and 3% metakaolin in the RMAP. Despite the increase in viscosity with the addition of the atomizing slag, the flow of the RMAP increased from 160 to 175 mm due to the spherical particle shape of the slag; in addition, the strength and water absorption coefficient also improved. In particular, the adhesion tension increased from 1.8 N/mm2 to 2.4 N/mm2 or higher.