首页> 外文期刊>Acta Biomaterialia Odontologica Scandinavica >Light-curing of orthodontic bracket adhesive by transillumination through dentine and enamel
【24h】

Light-curing of orthodontic bracket adhesive by transillumination through dentine and enamel

机译:通过牙本质和牙釉质的透照法对正畸托槽胶进行光固化

获取原文
           

摘要

Bonding properties of light-curing adhesive cured by transillumination through the tooth were compared to those achieved by the conventional technique. The study analyzed the degree of cure (DC%), debonding force (DF) and adhesive remnant index (ARI) when light was transmitted through dental hard tissues.Slices of dentin and enamel of 1?mm in thickness were combined with total thicknesses of 3 or 4?mm to simulate tooth structure without the pulp tissue. DC% with curing time of 20?s, 40?s and 60?s and irradiance power was measured for each group (n ?=?5). Brackets were bonded using transillumination on extracted incisors (n ?=?6) and premolars (n ?=?10), and DF was measured and ARI was scored.No statistical difference was found in light transmission between the simulated samples and incisors (p >?.05). Increasing the curing time from 40?s to 60?s enhanced the DC% only in premolars (p ?
机译:将通过牙齿的透照光固化的光固化粘合剂的粘合性能与传统技术的粘合性能进行了比较。研究分析了光透过牙齿硬组织时的固化程度(DC%),剥离力(DF)和黏着残余指数(ARI)。将厚度为1?mm的牙本质和牙釉质的切片与总厚度为3或4?mm以模拟没有牙髓组织的牙齿结构。对于每组,测量固化时间分别为20μs,40μs和60μs的DC%和辐照功率(nη= 5)。用透照法将托槽粘结在取出的门牙(n = 6)和前磨牙(n = 10)上,测量DF和ARI的得分。模拟的样品和门牙(> ?. 05)。将固化时间从40?s增加到60?s,仅在前磨牙中会增加DC%(p <0.05)。通过透照在门齿和前磨牙中都获得了足够的DF,但是在前磨牙中,与常规固化的托槽相比,DC%仍然较低。大多数托槽失效是由于托槽-胶粘剂粘合力差造成的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号