首页> 外文期刊>Desalination and water treatment >Characterization and pretreatment of dyeing wastewater from the cotton and polyester textile industry in Egypt
【24h】

Characterization and pretreatment of dyeing wastewater from the cotton and polyester textile industry in Egypt

机译:埃及棉花和聚酯纺织工业中印染废水的表征和预处理

获取原文
获取原文并翻译 | 示例
           

摘要

The Al-Alamia Dye Company in Cairo, Egypt faces a variety of problems due to unhealthy conditions resulting from the discharge of dye wastewater into sewer systems. These dyes not only cause enormous environmental pollution problems, but they also interfere with treatment system operations. From study the characterization of the dye wastewater resulting from the company, a physiochemical pretreatment for the wastewater dye effluents as a pretreatment step prior to membrane separation was suggested. The aim of the present work is to characterize the dye wastewater resulting from the dye processes of cotton and polyester and evaluate a proposed physiochemical treatment process for reducing pollution prior to membrane separation. Physiochemical analyses of composite samples for both cotton and polyester wastewater dyes were investigated. The characteristics of the cotton dye wastewater proved high TDS concentration (5,400-14,000 mg/L) and low COD concentration (154-684 mg/L). The analyses of the polyester dye wastewater proved low TDS concentration (350-2,561 mg/L) and high COD concentration (354-3,051 mg/L). A remarkable suspended solids concentration (SS) and heavy metals for both polyester and cotton dye wastewater were determined. The pretreatment proved that aluminum sulfate with 200 mg/L dose is the optimum for reducing SS concentration and COD concentration for cotton wastewater dyeing. Also it was found that a 600 mg/L does of ferric chloride is the optimum for reducing the SS and COD concentration for polyester wastewater dyeing.
机译:埃及开罗的Al-Alamia染料公司由于将染料废水排入下水道系统而造成的不健康状况,面临着各种问题。这些染料不仅引起巨大的环境污染问题,而且还干扰了处理系统的运行。通过对公司生产的染料废水的表征研究,建议对废水中的染料废水进行物理化学预处理,作为膜分离之前的预处理步骤。本工作的目的是表征由棉和聚酯的染色过程产生的染料废水,并评估提出的用于减少膜分离之前的污染的物理化学处理过程。研究了棉和聚酯废水染料的复合样品的理化分析。棉染料废水的特性证明高TDS浓度(5,400-14,000 mg / L)和低COD浓度(154-684 mg / L)。对聚酯染料废水的分析表明,其TDS浓度较低(350-2,561 mg / L),COD浓度较高(354-3,051 mg / L)。测定了聚酯和棉染料废水的显着悬浮固体浓度(SS)和重金属。预处理证明200 mg / L的硫酸铝是降低棉废水染色中SS浓度和COD浓度的最佳选择。还发现600 mg / L的氯化铁是降低聚酯废水染色中SS和COD浓度的最佳选择。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号