首页> 外文期刊>Cybernetics, IEEE Transactions on >Collaborative Tracking Control of Dual Linear Switched Reluctance Machines Over Communication Network With Time Delays
【24h】

Collaborative Tracking Control of Dual Linear Switched Reluctance Machines Over Communication Network With Time Delays

机译:时滞通信网络上双线性开关磁阻电机的协同跟踪控制

获取原文
获取原文并翻译 | 示例
           

摘要

This paper investigates the collaborative tracking control for dual linear switched reluctance machines (LSRMs) over a communication network with random time delays. Considering the spatio-temporal constraint relationship of the dual LSRMs in complex industrial processes, the collaborative tracking control scheme is proposed based on the networked motion control method. The stability conditions and the controller design method for the networked dual LSRMs are obtained from the two motors relative position error by using Lyapunov theory and delay systems approach. Four different allocation schemes combined with two kinds of external control signals are applied onto the collaborative tracking control experiment platform of the dual LSRMs to validate the effectiveness of the proposed method. The maximum steady-state relative position error within 0.104 mm can be achieved under the constant absolute position reference input signal of 3 mm, and the maximum absolute relative position error within ±0.46 mm can be achieved under the sinusoidal reference of 8 mm amplitude and 0.2 Hz.
机译:本文研究了具有随机时间延迟的通信网络上双线性开关磁阻电机(LSRM)的协作跟踪控制。针对复杂工业过程中双重LSRM的时空约束关系,提出了一种基于网络运动控制方法的协同跟踪控制方案。利用李雅普诺夫理论和时滞系统方法,从两个电机的相对位置误差中,得出了网络化双LSRM的稳定性条件和控制器的设计方法。将四种不同的分配方案与两种外部控制信号相结合,应用于双LSRM的协同跟踪控制实验平台,以验证该方法的有效性。在3mm的恒定绝对位置参考输入信号下,最大稳态相对位置误差可在0.104mm之内;在8mm振幅和0.2的正弦参考值下,最大稳态相对位置误差可在±0.46mm之内。赫兹。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号