Experimental study on bond behavior between high-strength grout and deformed steel bars

摘要

Engineers use high-strength grout to connect precast concrete members for its low shrinkage and good fluidity. This paper designed 87 central pull-out specimens using the control variable method to investigate the influence of factors on the rebar-grout bond property such as compressive strength, steel grade, bar diameter, transverse stirrups, and bond length. The test result showed that improving grout compressive strength (85.8 MPa-122.7 MPa) cannot improve the bond strength, which was different from the previous conclusions of concrete pull-out tests. Simplified formulas were presented for calculating the characteristic values of bond strength, residual strength, peak slip, and relative slip of load-holding platform based on parameter analysis. Then, a constitutive model was proposed to predict the full-range bond stress-slip curve of high-strength grout and steel bar speci-mens from bearing to failure. Finally, FEA models were established to evaluate the applicability and accuracy of the constitutive model.