Discussion on 'Hydraulic head interpolation using ANFIS-model selection and sensivity analysis' by Kurtulus and Flipo (2012), Computers & Geosciences, 38, 43-51

摘要

In Kurtulus and Flipo (2012), ANFIS has the inputs which are XY coordinates of piezometers plus the elevation of the ground and the output which is hydraulic head. Data set is divided into three parts such as train, test and validation. In this study, different membership functions (4 types) are employed with different number of fuzzy sets (2, 3, 4, 5), and the results measured with RMSE and R~2 are presented in Table 3 (Kurtulus and Flipo, 2012) (Fig. 1).