Thoughts on two approaches for accounting for the scatter in fatigue delamination growth curves

摘要

This paper discusses two approaches that have been proposed to account for the data scatter observed in delamination growth tests under cyclic-fatigue loading and thereby enable an estimate of a worst-case delamination growth curve for use in the damage tolerance and durability assessment of composite and adhesively-bonded airframes. The two approaches discussed are: (a) the normalisation approach, whereby the energy release rate is divided by the resistance to delamination growth, G(R)(a), and (b) the Hartman-Schijve approach to delamination growth. It is shown that for the cases considered this normalisation approach can be used to yield curves that are similar to the 'mean-3 sigma', "worst-case", i.e. upper-bound, curve obtained using the Hartman-Schijve equation. However, despite the reduction in the scatter that arises if this particular normalisation approach is adopted, there is still considerable scatter in the important "near-threshold" region. In this region the normalised curves are bounded above by the 'mean-3 sigma' curve obtained using the Hartman-Schijve equation. To address this issue, an alternative normalisation approach is then proposed. This alternative normalisation approach has the advantage of having reduced scatter in the near-threshold region but elsewhere is significantly more conservative than the Hartman-Schijve approach.