首页> 外文期刊>Composite Structures >Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites
【24h】

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

机译:织物架构对碳/环氧树脂复合材料机械和损伤行为影响的实验研究

获取原文
获取原文并翻译 | 示例
           

摘要

The mechanical behaviors and damage evolutions of carbon/epoxy woven fabric composites with three different geometries, i.e., one plain weave and two twill weave patterns with different areal densities, are studied under tensile loading. The effects of weave patterns on mechanical properties are investigated by monotonic and cyclic tension tests. Remarkable variations in stress-strain curve, Poisson's ratio, residual strain and strain map exist in the three composites. Crimp ratio is found to be a critical factor to govern the mechanical properties. With smaller crimp ratio, a quasi-linear stress-strain curve with higher elastic modulus and strength is observed. The stress-strain curves of composites with higher crimp ratio contain transition stages with significant tangent modulus degradation. Elastic modulus, strength and damage initiation are all correlated with the crimp ratio linearly regardless of the fabric pattern. Dramatic nonlinear evolution in Poisson's ratio occurs in the composite with higher crimp ratio. Cyclic tension results indicate that the residual strain is a more appropriate damage indicator than the unloading elastic modulus. Microstructure examination shows that damage developments are essentially related to the fabric geometry, and result in various mechanical behaviors. This study provides important insights into the geometry-deformation mechanism-mechanical property relationship of the woven composites.
机译:在拉伸载荷下,研究了三种不同几何形状,即三种不同几何形状的碳/环氧织物复合材料的机械行为和损伤演化,即一个平纹编织和两种斜纹织物图案。通过单调和循环张力试验研究了织物图案对机械性能的影响。在三个复合材料中存在应力 - 应变曲线,泊松比,残留应变和应变映射的显着变化。发现压接比是控制机械性能的关键因素。具有较小的卷曲比,观察到具有较高弹性模量和强度的准线性应力 - 应变曲线。具有更高卷曲比的复合材料的应力 - 应变曲线包含具有显着切线模量的过渡阶段。无论织物图案如何,弹性模量,强度和损伤引发都与线性线性的线性相关。泊松比中的剧烈非线性演变在具有更高卷曲比的复合材料中发生。循环张力结果表明残留应变是比卸载弹性模量更合适的损伤指示。微观结构检查表明,损伤的发展基本上与织物几何形状相关,并导致各种机械行为。本研究提供了对织物复合材料的几何形状变形机理 - 力学性能关系的重要见解。

著录项

  • 来源
    《Composite Structures》 |2021年第2期|113366.1-113366.13|共13页
  • 作者单位

    Ohio State Univ Coll Engn Columbus OH 43212 USA;

    McMaster Univ Dept Mech Engn Hamilton ON L8S 4L7 Canada;

    Clemson Univ Dept Mech Engn Clemson SC 29634 USA;

    Shanghai Jiao Tong Univ State Key Lab Mech Syst & Vibrat Shanghai Peoples R China;

    Shanghai Jiao Tong Univ State Key Lab Mech Syst & Vibrat Shanghai Peoples R China;

    Ford Motor Co Dept Mat Mfg Dearborn MI 48124 USA;

    Ford Motor Co Dept Mat Mfg Dearborn MI 48124 USA;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Woven fabric composite; Crimp ratio; Mechanical behavior; Damage;

    机译:编织织物复合;压接比;机械行为;损坏;
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号