首页> 外文期刊>Combustion and Flame >Experiments On Chemical Looping Combustion Of Coal With A Nio Based Oxygen Carrier
【24h】

Experiments On Chemical Looping Combustion Of Coal With A Nio Based Oxygen Carrier

机译:镍基氧气载体对煤进行化学循环燃烧的实验

获取原文
获取原文并翻译 | 示例
       

摘要

A chemical looping combustion process for coal using interconnected fluidized beds with inherent separation of CO_2 is proposed in this paper. The configuration comprises a high velocity fluidized bed as an air reactor, a cyclone, and a spout-fluid bed as a fuel reactor. The high velocity fluidized bed is directly connected to the spout-fluid bed through the cyclone. Gas composition of both fuel reactor and air reactor, carbon content of fly ash in the fuel reactor, carbon conversion efficiency and CO_2 capture efficiency were investigated experimentally. The results showed that coal gasification was the main factor which controlled the contents of CO and CH_4 concentrations in the flue gas of the fuel reactor, carbon conversion efficiency in the process of chemical looping combustion, of coal with NiO-based oxygen carrier in the interconnected fluidized beds. Carbon conversion efficiency reached only 92.8% even when the fuel reactor temperature was high up to 970℃. There was an inherent carbon loss in the process of chemical looping combustion of coal in the interconnected fluidized beds. The inherent carbon loss was due to an easy elutriation of fine char particles from the freeboard of the spout-fluid bed, which was inevitable in this kind of fluidized bed reactor. Further improvement of carbon conversion efficiency could be achieved by means of a circulation of fine particles elutriation into the spout-fluid bed or the high velocity fiuidized bed. CO_2 capture efficiency reached to its equilibrium of 80% at the fuel reactor temperature of 960 ℃. The inherent loss of CO_2 capture efficiency was due to bypassing of gases from the fuel reactor to the air reactor, and the product of residual char burnt with air in the air reactor. Further experiments should be performed for a relatively long-time period to investigate the effects of ash and sulfur in coal on the reactivity of nickel-based oxygen carrier in the continuous CLC reactor.
机译:提出了一种采用固有流化床CO_2相互分离的流化床对煤进行化学循环燃烧的方法。该构造包括作为空气反应器的高速流化床,旋风除尘器和作为燃料反应器的喷流床。高速流化床通过旋风分离器直接连接到喷流床。实验研究了燃料反应堆和空气反应堆的气体组成,燃料反应堆中粉煤灰的碳含量,碳转化效率和CO_2捕集效率。结果表明,煤气化是控制燃料反应堆烟道气中CO,CH_4含量,化学环流燃烧过程中碳转化效率,内部含NiO基氧载体的煤的主要控制因素。流化床。即使当燃料反应堆温度高达970℃时,碳转化效率也仅达到92.8%。在相互连接的流化床中煤的化学循环燃烧过程中存在固有的碳损失。固有的碳损失是由于容易从喷流床的干舷中淘出细小的炭颗粒而造成的,这在这种流化床反应器中是不可避免的。通过将细颗粒淘析物循环到喷流床或高速流化床中,可以进一步提高碳转化效率。燃料反应堆温度为960℃时,CO_2的捕集效率达到其平衡的80%。 CO_2捕集效率的固有损失是由于从燃料反应器到空气反应器的气体旁路,以及空气反应器中残留的焦炭与空气一起燃烧的产物。应该在相对较长的时间内进行进一步的实验,以研究煤中灰分和硫对连续CLC反应器中镍基氧载体反应性的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号