首页> 外文期刊>Combustion and Flame >Multi-environment probability density function approach for turbulent partially-premixed methane/air flame with inhomogeneous inlets
【24h】

Multi-environment probability density function approach for turbulent partially-premixed methane/air flame with inhomogeneous inlets

机译:具有不均匀入口的湍流部分预混甲烷/空气火焰的多环境概率密度函数方法

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The present study aims to systematically evaluate the capability of a multi-environment PDF approach using non-premixed and premixed tabulated chemistry to predict the fundamental characteristics of turbulent partially-premixed piloted flames with near-homogeneous and inhomogeneous inlets. For the near-homogeneous case, the non-premixed manifold yields better agreement with measurements in terms of conditional mean, unconditional mean, and rms scalars; however, the premixed manifold generates a narrower hot flame zone, which is mainly attributed to its inability to account for diffusion in the mixture fraction space. For the inhomogeneous flame, the premixed and non-premixed manifolds are limited in their ability to reproduce the measured flame at upstream locations with multiple combustion modes, while the non-premixed manifold is reasonably good at predicting the unconditional and conditional profiles of all scalars in the downstream regions with dominant non-premixed combustion. In terms of the predicted environment-conditioned scalar profiles, the present multi-environment PDF approach demonstrated the ability to realistically predict the near-vertical transition from the fuel-rich flammable mixture condition to the stoichiometric pilot condition. Unlike the near-homogeneous case, the inhomogeneous case generates a distinctly different distribution of CO conditional means, where the peak conditional CO level is leaning to the richer side along the downstream region. This tendency is a clear indication of the flame transition from a premixed-dominated flame to a diffusion-dominated flame. Based on our numerical results, detailed discussions about the essential features of turbulent partially-premixed flames with multiple combustion modes are presented, as well as the limitations of the proposed approach. (C) 2017 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
机译:本研究旨在系统地评估使用非预混和预混列表化学方法的多环境PDF方法的能力,以预测湍流的部分预混引燃火焰的基本特性,这些火焰具有近乎均匀和不均匀的入口。对于近乎均质的情况,非预混流形在条件均值,无条件均值和均方根标量方面与测量结果具有更好的一致性;然而,预混合歧管产生较窄的热火焰区,这主要归因于其无法考虑在混合物馏分空间中的扩散。对于不均匀的火焰,预混合歧管和非预混合歧管在多种燃烧模式下在上游位置再现测量火焰的能力受到限制,而非预混歧管则在预测所有标量的无条件和有条件分布方面相当不错。非预混燃烧占主导地位的下游区域。就预测的环境条件标量曲线而言,当前的多环境PDF方法证明了能够现实地预测从富含燃料的可燃混合物状态到化学计量的先导条件的近乎垂直过渡的能力。与近似均质的情况不同,非均质的情况会产生明显不同的CO条件分布,其中条件条件CO峰值沿着下游区域向较富裕的一侧倾斜。这种趋势清楚地表明了火焰从预混合为主的火焰过渡到扩散为主的火焰。根据我们的数值结果,详细讨论了具有多种燃烧模式的湍流部分预混火焰的基本特征,以及所提出方法的局限性。 (C)2017燃烧研究所。由Elsevier Inc.出版。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号