首页> 外文期刊>Combustion and Flame >Performance of iodine oxides/iodic acids as oxidizers in thermite systems
【24h】

Performance of iodine oxides/iodic acids as oxidizers in thermite systems

机译:碘氧化物/碘酸在铝热剂体系中作为氧化剂的性能

获取原文
获取原文并翻译 | 示例
       

摘要

Iodine oxides are of interest as biocidal components in energetic application such as thermites due to their high energy release and biocidal agent delivery. In this study, various iodine oxides/iodic acids, including I2O5, Hl(3)O(8) and HIO3, were employed as oxidizers in thermite systems. Their decomposition behaviors were studied using a home-made time resolved temperature-jump/time-of-flight mass spectrometer (T-Jump/TOFMS), which identified a single step decomposition for all oxides at high heating rates (similar to 10(5) K/s). In addition, both nano-aluminum (nAl, similar to 80 nm) and nano-tantalum (nTa, 50 nm) were adopted as the fuel in order to fully understand how iodine containing oxidizers react with the fuel during ignition. The ignition and reaction process of nAl-based and nTa-based thermites were characterized with T-Jump/TOFMS, and their combustion properties were evaluated in a constant-volume combustion cell and compared to a traditional thermite system (nAl/CuO). The ignition temperatures of nAl-based thermites using these oxidizers were all very close to the melting point of aluminum (similar to 660 degrees C), which suggests that the mobility of the aluminum core dominats the ignition/reaction and the gaseous oxygen released from the decomposition of the oxidizer does not participate in the ignition until the molten aluminum is available. Unlike nAl-based thermites, the ignition temperatures of nTa-based thermites are lower than the oxygen release temperatures from the corresponding bare oxidizers. All nTa-based thermites ignited prior to the release of gas phase oxygen. In this case, a condensed phase reaction mechanism is proposed to dominate the ignition process. Moreover, combustion cell tests results show that nAl/a-HI3O8 has the highest pressurization rate and peak pressure and shortest burn time, and since it also has an iodine content of 75% as high as I2O5 on a per mass basis, this material may be a very promising candidate in biocidal application. (C) 2018 Published by Elsevier Inc. on behalf of The Combustion Institute.
机译:由于高能量释放和生物杀灭剂的递送,碘氧化物作为高能应用中的杀生物组分,例如铝酸盐,是令人感兴趣的。在这项研究中,包括I2O5,Hl(3)O(8)和HIO3的各种碘氧化物/碘酸被用作铝热剂体系中的氧化剂。使用自制的时间分辨温度跳跃/飞行时间质谱仪(T-Jump / TOFMS)研究了它们的分解行为,该质谱仪确定了所有氧化物在高加热速率下的一步分解(类似于10(5 )K / s)。另外,为了充分理解含碘氧化剂在点火过程中如何与燃料反应,将纳米铝(nAl,类似于80 nm)和纳米钽(nTa,<50 nm)用作燃料。利用T-Jump / TOFMS对nAl基和nTa基铝热剂的点火和反应过程进行了表征,并在恒定体积的燃烧室中评估了它们的燃烧性能,并将其与传统铝热体系(nAl / CuO)进行了比较。使用这些氧化剂的基于nAl的铝热剂的着火温度都非常接近铝的熔点(大约660摄氏度),这表明铝芯的迁移率决定了着火/反应和从炉膛中释放出的气态氧。直到熔融的铝可用,氧化剂的分解才参与点火。与基于nAl的铝土矿不同,基于nTa的铝土矿的着火温度低于相应的裸氧化剂的氧气释放温度。所有基于nTa的铝热剂都在释放气相氧气之前被点燃。在这种情况下,提出了一种凝聚相反应机理来主导点火过程。此外,燃烧室测试结果表明,nAl / a-HI3O8具有最高的加压速率和峰值压力,并且燃烧时间最短,并且由于其按质量计的碘含量也高达I2O5的75%,因此该材料可能成为杀生物应用中非常有前途的候选人。 (C)2018年由Elsevier Inc.代表燃烧研究所出版。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号