GENERATORS AND CONTROLLERS FOR MICRO POWER BASED DISTRIBUTED POWER SYSTEMS

摘要

Micro turbine based generator systems are becoming popular for providing electric power and heat in a cogeneration environment. The reason for this is the fact that the high-speed turbo-generator sets are very compact in size and are competitive in the cogeneration environment. The electric generator is directly coupled to the high-speed turbine and must be capable of operating at the high speed. The typical micro and mini turbine speeds are in the range of 30,000 rpm to 120,000 rpm. The higher the power, lower is the speed. Thus a 40-kW micro turbine-generator may operate at 120,000 rpm, while a 500-kW mini-turbine may operate at 30,000 rpm. This article addresses a 200 kW, 60,000 rpm generator and controller suitable for direct coupling to a turbine. Many of the micropower units available in the market use permanent magnet generators. In the design presented here, induction generator technology is applied. It is believed that induction generators offer benefits such as lower cost, higher cycle efficiency, and safety of operation.