...
首页> 外文期刊>Clays and clay minerals >ION-EXCHANGE MODELING OF MONOVALENT ALKALI CATION ADSORPTION ON MONTMORILLONITE
【24h】

ION-EXCHANGE MODELING OF MONOVALENT ALKALI CATION ADSORPTION ON MONTMORILLONITE

机译:单价碱阳离子吸附在蒙脱石的离子交换模型

获取原文
获取原文并翻译 | 示例

摘要

Ion-exchange modeling is one of the most widely used methods to predict ion adsorption data on clay minerals. The model parameters (e.g. number of adsorption sites and the cation adsorption capacity of each site) are optimized normally by curve fitting experimental data, which does not definitively identify the local environment of the adsorption sites. A new approach for constructing an ion-exchange model was pursued, whereby some of the parameters needed were obtained independently, resulting in fewer parameters being based on data-curve fitting. Specifically, a reversed modeling approach was taken in which the number of types of sites used by the model was based on a previous first-principles Density Functional Theory study, and the relative distribution of these sites was based on the clay's chemical composition. To simplify the ion-exchange reactions involved, montmorillonite was Na-saturated to produce a well-controlled Na-montmorillonite (NaMnt) adsorbent. Ion adsorption data on NaMnt were collected from batch experiments over a wide range of pH, Cs(+)concentrations, and in the presence of coexisting cations. Ion-exchange models were developed and optimized to predict these cation adsorption data on NaMnt. The maximum amount of adsorption of monovalent cations on NaMnt was obtained from the plateau of the adsorption envelope data at high pH. The remaining equilibrium constants (pK) were optimized by curve fitting the edges of the adsorption envelope data. The resultant three-site ion-exchange model was able to predict the retention of Li+, Na+, K+, and Cs(+)very well as a function of pH. The model was then tested on adsorption envelopes of various combinations of these cations, and on Cs(+)adsorption isotherms at three different pH values. The pKvalues were constant for all assays. The interlayer spacing of NaMnt was also analyzed to investigate its relation with cation adsorption strength. An X-ray diffraction study of the samples showed that the measuredd(001)values for these cations were consistent with their adsorption pKvalues. The Cs(+)cation showed a strong ability to collapse the interlayer region of montmorillonite. In the presence of multiple competing cations, the broadening and presence of multipled(001)XRD peaks suggested that the cations in the interlayers may be segregated.
机译:离子交换建模是预测粘土矿物质离子吸附数据的最广泛使用的方法之一。模型参数(例如,吸附位点的数量和每个站点的阳离子吸附容量)通常通过曲线拟合实验数据进行优化,这并不明确地识别吸附位点的局部环境。追求一种用于构建离子交换模型的新方法,从而独立获得所需的一些参数,导致基于数据曲线配件的参数较少。具体地,采用反转建模方法,其中模型使用的位点类型的数量基于先前的第一原理函数理论研究,并且这些位点的相对分布基于粘土的化学组成。为了简化所涉及的离子交换反应,Montmorillonite是Na饱和的,得到良好控制的Na-Montmorillonite(Namnt)吸附剂。从批次实验中收集NamNT上的离子吸附数据,在各种pH,Cs(+)浓度和共存阳离子存在下。开发并优化了离子交换模型,以预测NAMNT上的这些阳离子吸附数据。在高pH下从吸附包络数据的平台获得Namnt上的单价阳离子的最大吸附量。通过曲线装配吸附包络数据的边缘来优化剩余的平衡常数(PK)。所得到的三个位离子交换模型能够预测Li +,Na +,K +和Cs(+)的保留良好的pH值。然后在这些阳离子的各种组合的吸附包络和三种不同pH值下测试该模型对这些阳离子的各种组合的吸附包络和Cs(+)吸附等温线。所有测定的pKValues都是恒定的。还分析了NamNT的层间间距以研究其与阳离子吸附强度的关系。样品的X射线衍射研究表明,这些阳离子的测量值(001)的值与其吸附PKValues一致。 Cs(+)阳离子显示出崩溃蒙脱石夹层区的良好能力。在多个竞争阳离子的存在下,乘法(001)XRD峰的扩展和存在表明,可以分离中间层中的阳离子。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号