...
首页> 外文期刊>Chinese Journal of Chemical Engineering >Hydrodynamics and Mass Transfer of Jet Co-flow Packing Tray
【24h】

Hydrodynamics and Mass Transfer of Jet Co-flow Packing Tray

机译:射流并流填料塔的流体力学和传质

获取原文
获取原文并翻译 | 示例
           

摘要

The jet co-flow packing tray(JCPT) with three different types of perforation in equal opening fraction was tested in two rectangular columns with 0.12m in width and 0.27m in length operated with air-water system. The influences of gas phase orifice F-factor and clear liquid height H_c on the amount of liquid lifted, Q, were examined. The corresponding correlation between Q with F-factor and equivalent diameter of perforated holes as well as H_c was obtained. Furthermore, the non-steady state mass transfer performance of JCPT was tested by the humidification of air with water. Finally, by the analysis of data and comparison, it was found that the JCPT tray with single cap and two holes exhibited the highest mass transfer efficiency and best performance.
机译:在两个宽度为0.12m,长度为0.27m的矩形矩形塔中,采用空气-水系统操作,测试了三种开口均等的射流同流填料塔板(JCPT)。研究了气相节流孔F因子和透明液体高度H_c对提升的液体量Q的影响。获得了Q与F因子和穿孔等效直径以及H_c之间的对应关系。此外,通过用水加湿空气来测试JCPT的非稳态传质性能。最后,通过数据分析和比较,发现具有单个盖和两个孔的JCPT托盘表现出最高的传质效率和最佳性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号