首页> 外文期刊>Chemosphere >Sources of PM_(2.5)-bound water soluble ions at EMEP's Auchencorth Moss (UK) supersite revealed by 3D-Concentration Weighted Trajectory (CWT) model
【24h】

Sources of PM_(2.5)-bound water soluble ions at EMEP's Auchencorth Moss (UK) supersite revealed by 3D-Concentration Weighted Trajectory (CWT) model

机译:PM_(2.5)的来源 - 在EMEP的Auchenc orthing MOSS(英国)的水溶性离子在3D浓度加权轨迹(CWT)模型中透露

获取原文
获取原文并翻译 | 示例
           

摘要

The ConcentrationWeighted Trajectory (CWT) model is a well-known tool which combines the residence time (trajectory points) of air masses over specific regions with ambient concentrations of air pollutants, aiming to identify potential long range transport impacts. An upgraded 3D-version of CWT model (3DCWT), investigating not only the geographical origin of the exogenous emissions but also the altitudinal layers in which the transport occurs, was developed and coupled with PM2.5-bound concentrations of water soluble ions (nss- SO4-2 (non-sea salt sulfates), NO3-, Cl-, NH4+, Na+, Mg+2, Ca+2 and K+) for the years 2017-2018, derived by the Auchencorth Moss supersite in Southeast Scotland, United Kingdom (UK). The 3D-CWT model was implemented in two distinct altitudinal layers above ground level (0 m = Layer 1 1000 m, 1000 m = Layer 2 2000 m), because few trajectory points exceeded the 2000 m limit. Transport of Secondary Inorganic Aerosols (SIA) from South e Southeast England were detected in both vertical layers, affecting SO42-, NO3-, and NH+ 4 levels, whilst SIA intrusions from Northwest Europe were detected in Layer 2. Sea salt particle transport from North Atlantic and the North Sea, comprising Cl-, Na+ and Mg+2, were detected in both layers whilst K+ contributions from Southeast England were also detected in both layers, suggesting also impacts from biomass burning. Moreover particle transport of a crustal origin, marked by Ca+2 enhancement, mainly occurred in layer 1 and included soil/dust resuspension from areas around the station and infrequent dust intrusions from the Sahara desert. (C) 2021 Elsevier Ltd. All rights reserved.
机译:浓度重量的轨迹(CWT)模型是一种众所周知的工具,其将空气质量的停留时间(轨迹点)与空气污染物的环境浓度相结合,旨在识别潜在的长距离运输冲击。升级的3D-Version的CWT模型(3DCWT),不仅调查了外源排放的地理来源,而且还开发了运输的海拔层,并与PM2.5的水溶性离子浓度相结合(NSS 2017-2018年,SO4-2(非海盐硫酸盐),No3-,Cl-,NH4 +,Na +,Mg + 2,Ca + 2和K +),由Auchenctorth Moss Supersite在Southteast Scotland,United王国(英国)。 3D-CWT模型在地上的两个不同的高度层中实现(0 m = 1层1 .110 m,1000 m&层2& 2000米),因为很少的轨迹点超过了2000米的限制。在垂直层中检测到南部南部的二级无机气溶胶(SIA),影响SO42-,NO3-和NH + 4水平,来自西北欧洲的SIA入侵在第2层中检测到北方海盐粒子运输在这两层中检测到包括Cl-,Na +和Mg + 2的大西洋和北海,而在两层中也检测到来自东南部的k +贡献,这也是从生物量燃烧的影响。此外,由Ca + 2增强标记的地壳起源的颗粒传输主要发生在第1层中,包括土壤/粉尘从站周围的区域和撒哈拉沙漠中的尘尘侵入。 (c)2021 elestvier有限公司保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号