Electro-Fenton, solar photoelectro-Fenton and UVA photoelectro-Fenton: Degradation of Erythrosine B dye solution

摘要

The treatment of Erythrosine B, selected as a model compound, has been comparatively studied by electrochemical advanced oxidation processes (EAOPs) such as electro-Fenton, UVA photoelectro-Fenton and solar photoelectro-Fenton at constant current density. Experiments are performed in a onecompartment cell with a BDD anode, and a commercial carbon felt cathode at pH = 3, treating a volume of 0.3 L in each test. The irradiation plays a crucial role in the increasing of hydroxyl radical production and in the recover of iron catalyst. A faster colour and COD removal degradation are achieved under the light application. UVA photoelectro-Fenton and solar photoelectro-Fenton processes allow degrading COD entirely in 90 min, while a conventional electro-Fenton does not reach 90% COD removal after 2 h. Energy consumptions are a substantial factor in process selection. Photo electro-Fenton with a UVA-100 W lamp has one of the best removal performance, but it becomes not suitable for application due to high energy demand, up to 515.6 kWh m(-3), and the UVA system requires the main fraction of this energy. Possible alternatives are proposed to contain costs: the first is the reduction of UVA lamp power to 25 W, maintaining a high-performance removal with an Ec decreasing to 187.9 kWh m(-3). Nevertheless, the lowest and competitive energy demands is obtained working with a solar photoelectro-Fenton system, where energy consumption are only related to the electrochemical process (20.9 kWh m(-3)), and removal is complete. (C) 2020 Elsevier Ltd. All rights reserved.