...
首页> 外文期刊>Chemie Ingenieur Technik >Entwsserung ionischer Flüssigkeiten in einem Fallfilmverdampfer
【24h】

Entwsserung ionischer Flüssigkeiten in einem Fallfilmverdampfer

机译:降膜蒸发器中离子液体的排放

获取原文
获取原文并翻译 | 示例
           

摘要

Die Entwsserung ionischer Flüssigkeiten (IL) wurde in einem Einrohr-Metallfallfilmverdampfer experimentell untersucht. Abhngig von den Prozessbedingungen konnten in einer Batchfahrweise Restwassergehalte von ca. 0,2 Gew.-% (2000 ppm) erreicht werden. Unter der Annahme einer Entwsserung bis ins Gleichgewicht konnten Dampfdruckkurven von IL/Wasser-Lösungen und daraus Ausdampfwrmen abgeschtzt werden. Die whrend der Entwsserung online gemessene Viskositt erwies sich als geeignetes Maß zur Verfolgung des Entwsserungsprozesses.Experimental investigations on the dewatering of ionic liquids (IL) in a single falling film evaporator were carried out. Depending on the process conditions, such as heating temperature and process pressure, a minimum water content of 0.2 wt-% (2000 ppm) was achieved using batch mode. Assuming that these water contents represent equilibrium state at constant temperatures and pressures, vapor pressure curves of different IL-water mixtures were obtained and from these the required heat for evaporation could be estimated. During the dewatering process viscosity was monitored online and proved to be a sufficient and reliable indicator for dewatering progress.
机译:在单管金属降膜蒸发器中对离子液体(IL)的排放进行了实验研究。根据工艺条件,分批操作可实现约0.2%重量(2000 ppm)的残留水含量。假设排水达到平衡,则可以估算IL /水溶液的蒸气压曲线和来自它们的蒸发热。脱水过程中在线测量的粘度被证明是跟踪脱水过程的合适方法,并在单个降膜蒸发器中进行了离子液体(IL)脱水的实验研究。根据工艺条件,例如加热温度和工艺压力,使用批处理模式可实现0.2 wt%(2000 ppm)的最小水含量。假设这些水含量在恒定温度和压力下代表平衡状态,则可获得不同IL-水混合物的蒸气压曲线,并据此估算蒸发所需的热量。在脱水过程中,在线监测粘度,并证明该粘度是脱水进度的充分和可靠的指标。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号