...
首页> 外文期刊>Biomass & bioenergy >Bio-hydrocarbons through catalytic pyrolysis of used cooking oils and fatty acids for sustainable jet and road fuel production
【24h】

Bio-hydrocarbons through catalytic pyrolysis of used cooking oils and fatty acids for sustainable jet and road fuel production

机译:通过废热食用油和脂肪酸的催化热解产生的生物碳氢化合物,以可持续地生产喷气机和道路燃料

获取原文
获取原文并翻译 | 示例

摘要

Used Cooking Oil (UCO) and pure Fatty Acids (FAs) derived from food processing represent sustainable feedstocks for biofuel production. The catalytic and non-catalytic pyrolysis of these residual oils is a possible pathway to advanced biofuel production, alternative to catalytic hydrotreatment, already commercially deployed in large-scale installations. The present work first carried out a literature review of previous research works in the field, which provided the key information to the following implementation of a pilot-scale dedicated experimental work aimed at producing bio-hydrocarbons from residual vegetable oils, with a special focus on paraffinic fuels. Based on the literature survey, 4 different catalysts were selected for the experimental investigation. Catalytic and non-catalytic pyrolysis of UCO was initially carried out in 1.5 kg h~(-1) (max) feed pilot unit, operated at 500 ℃, with the catalytic reactor working at 4 and 2.5 h~(-1) Weight Hourly Space Velocity (WHSV). Liquid yields and corresponding hydrocarbon fractions were investigated: these initial results suggested to extend the study to catalytic pyrolysis of pure Fas. At T = 500 ℃ and with activated carbons as catalyst, the total observed hydrocarbon yield mass fraction on UCO and FA increased from 23% (UWHSV = 4 h~(-1)) to 35% (UCO, WHSV = 2.5 h~(-1)) and finally to 40% (FA, WHSV = 2.5 h~(-1)). A slight reduction in the overall liquid yield mass fraction was also observed in this last experiment with Fas (from 63% to =49%). Even if the current work on the pilot pyrolyser did not aim at investigating energy and process optimization, including yield maximization and catalyst lifetime, experimental results indicated that catalytic pyrolysis could be a promising way for industrial production of hydrocarbons from low quality lipid-based materials (as it is the case of UCOs) and without requiring hydrogen for catalytic hydrotreatment.
机译:来自食品加工的废烹饪油(UCO)和纯脂肪酸(FAs)代表了生物燃料生产的可持续原料。这些残油的催化和非催化热解是高级生物燃料生产的可能途径,可替代催化加氢处理,而催化加氢处理已在大规模装置中进行了商业部署。本工作首先对该领域以前的研究工作进行了文献综述,为随后实施旨在从残留植物油生产生物碳氢化合物的中试规模的专门实验工作提供了关键信息,其中特别着重于石蜡燃料。根据文献调查,选择了4种不同的催化剂进行实验研究。 UCO的催化和非催化热解最初在1.5 kg h〜(-1)(max)进料中试装置中进行,该装置在500℃下运行,催化反应器分别在4和2.5 h〜(-1)重量下运行太空速度(WHSV)。对液体产率和相应的烃馏分进行了研究:这些初步结果表明,该研究扩展到了纯Fas的催化热解。在T = 500℃时,以活性炭为催化剂,在UCO和FA上观察到的总烃收率质量分数从23%(UWHSV = 4 h〜(-1))增加到35%(UCO,WHSV = 2.5 h〜( -1)),最后达到40%(FA,WHSV = 2.5 h〜(-1))。在最后的使用Fas的实验中,也观察到总液体收率质量分数略有降低(从63%降至= 49%)。即使当前在中试热解炉上的工作并非旨在研究能源和工艺优化,包括最大程度地提高产率和催化剂寿命,实验结果也表明,催化热解可能是从低质量脂质基材料工业生产碳氢化合物的有前途的方法( (例如UCO),并且不需要氢气进行催化加氢处理。

著录项

  • 来源
    《Biomass & bioenergy 》 |2016年第12期| 424-435| 共12页
  • 作者单位

    RE-CORD and CREAR, Industrial Engineering Department, University of Florence, Viale Morgagni 40, 50134 Florence Italy;

    RE-CORD and CREAR, Industrial Engineering Department, University of Florence, Viale Morgagni 40, 50134 Florence Italy;

    RE-CORD and CREAR, Industrial Engineering Department, University of Florence, Viale Morgagni 40, 50134 Florence Italy;

    RE-CORD and CREAR, Industrial Engineering Department, University of Florence, Viale Morgagni 40, 50134 Florence Italy;

    RE-CORD and CREAR, Industrial Engineering Department, University of Florence, Viale Morgagni 40, 50134 Florence Italy;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Biofuels; Aviation; Biokerosene; Vegetable oil; Used cooking oil; Residual vegetable oil and lipids; Catalytic pyrolysis; Deoxygenation;

    机译:生物燃料;航空;生物煤油;植物油;用过的食用油;残留的植物油和脂质;催化热解;脱氧;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号