首页> 外文期刊>IEEE transactions on automation science and engineering >Using the Soar Cognitive Architecture to Remove Screws From Different Laptop Models
【24h】

Using the Soar Cognitive Architecture to Remove Screws From Different Laptop Models

机译:使用Soar认知架构从不同型号的笔记本电脑上卸下螺丝

获取原文
获取原文并翻译 | 示例
           

摘要

This paper investigates an approach that uses the cognitive architecture Soar to improve the performance of an automated robotic system, which uses a combination of vision and force sensing to remove screws from laptop cases. Soar's long-term memory module, semantic memory, was used to remember pieces of information regarding laptop models and screw holes. The system was trained with multiple laptop models and the method in which Soar was used to facilitate the removal of screws was varied to determine the best performance of the system. In all the cases, Soar could determine the correct laptop model and in what orientation it was placed in the system. Soar was also used to remember what circle locations that were explored contained screws and what circles did not. Remembering the locations of the holes decreased a trial time by over 60%. The system performed the best when the number of training trials used to explore circle locations was limited, as this decreased the total trial time by over 10% for most of the laptop models and orientations.Note to Practitioners-Although the amount of discarded electronic waste in the world is rapidly increasing, efficient methods that can handle this in an automated non-destructive fashion have not been developed. Screws are a common fastener used on electronic products, such as laptops, and must be removed during nondestructive methods. In this paper, we focus on using the cognitive architecture Soar to facilitate the disassembly sequence of removing these screws from the back of laptops. Soar is able to differentiate between different models of laptops and store the locations of screws for these models leading to an improvement of the disassembly time when the same laptop model is used. Currently, this paper only uses one of Soar's long-term memory modules (semantic memory) and a screwdriver tool. However, this paper can be extended to use multiple tools by using different features available in Soar such as other long-term memory modules and substates.
机译:本文研究了一种使用Soar认知体系结构来提高自动化机器人系统性能的方法,该系统结合了视觉和力感应功能来从笔记本电脑外壳中卸下螺丝。 Soar的长期存储模块语义存储用于记住有关笔记本电脑型号和螺孔的信息。该系统使用多种笔记本电脑型号进行了培训,并且使用Soar来方便卸下螺钉的方法有所不同,以确定系统的最佳性能。在所有情况下,Soar都能确定正确的笔记本电脑型号以及它在系统中的放置方向。还使用Soar记忆所探查的圆形位置包含螺钉,而哪些圆圈没有螺钉。记住孔的位置将试用时间减少了60%以上。当用于探索圆圈位置的训练试验数量有限时,该系统表现最佳,因为对于大多数笔记本电脑型号和方向,这将使总试验时间减少了10%以上。从业者注意-尽管丢弃的电子废物数量在世界上,快速增长的,能以自动化无损方式处理这一问题的有效方法尚未得到开发。螺钉是电子产品(例如笔记本电脑)上常用的紧固件,在非破坏性方法中必须将其卸下。在本文中,我们将重点放在使用Soar的认知体系结构上,以促进从笔记本电脑背面卸下这些螺钉的拆卸顺序。 Soar能够区分不同型号的笔记本电脑,并存储这些型号的螺钉位置,从而在使用相同型号的笔记本电脑时缩短了拆卸时间。当前,本文仅使用Soar的长期内存模块(语义内存)之一和螺丝刀工具。但是,可以通过使用Soar中可用的不同功能(例如其他长期内存模块和子状态)将本文扩展为使用多种工具。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号