...
首页> 外文期刊>Atmospheric environment >Role of the boundary layer in the occurrence and termination of the tropospheric ozone depletion events in polar spring
【24h】

Role of the boundary layer in the occurrence and termination of the tropospheric ozone depletion events in polar spring

机译:边界层在极地春季对流层臭氧消耗事件的发生和终止中的作用

获取原文
获取原文并翻译 | 示例
           

摘要

Tropospheric ozone depletion events (ODES) in the polar spring are frequently observed in a stable boundary layer condition, and the end of the events occurs when there is a breakup of the boundary layer. In order to improve the understanding of the role of the boundary layer in the ozone depletion event, a one-dimensional model is developed, focusing on the occurrence and the termination period of the ozone depletion episode. A module accounting for the vertical air transport is added to a previous box model, and a first-order parameterization is used for the estimation of the vertical distribution of the turbulent diffusivity. Simulations are performed for different strengths of temperature inversion as well as for different wind speeds. The simulation results suggest that the reactive bromine species released from the underlying surface into the lowest part of the troposphere initially stay in the boundary layer, leading to an increase of the bromine concentration. This bromine accumulation causes the ozone destruction below the top of the boundary layer. After the ozone is totally depleted, if the temperature inversion intensity decreases or the wind speed increases, the severe ozone depletion event tends to transit into a partial ozone depletion event or it recovers to the normal ozone background level of 30-40 ppb. This recovery process takes about 2 h. Due to the presence of high-level HBr left from the initial occurrence of ODEs, the complete removal of ozone in the boundary layer is achieved a few days after the first termination of ODE. The time required for the recurrence of the ozone depletion in a 1000 m boundary layer is approximately 5 days, while the initial occurrence of the complete ozone consumption takes 15 days. The present model is suitable to clarify the reason for both the start and the termination of the severe ozone depletion as well as the partial ozone depletion in the observations. (C) 2016 Elsevier Ltd. All rights reserved.
机译:在稳定边界层条件下经常观察到极地春季的对流层臭氧消耗事件(ODES),并且当边界层破裂时,事件结束。为了更好地了解边界层在臭氧消耗事件中的作用,建立了一个一维模型,重点关注臭氧消耗事件的发生和终止期。将用于垂直空气传输的模块添加到先前的盒模型中,并且使用一阶参数化来估计湍流扩散率的垂直分布。针对不同强度的温度反演以及不同风速执行了仿真。模拟结果表明,从下表面释放到对流层最低部分的反应性溴物质最初留在边界层,导致溴浓度增加。这种溴的积累导致边界层顶部以下的臭氧破坏。臭氧完全耗尽后,如果温度反转强度降低或风速增加,则严重的臭氧消耗事件趋于转变为部分臭氧消耗事件,或者恢复到正常的臭氧本底水平30-40 ppb。此恢复过程大约需要2小时。由于最初发生ODE时会残留高水平的HBr,因此在ODE第一次终止后的几天内就可以完全清除边界层中的臭氧。在1000 m边界层中恢复臭氧层消耗所需的时间约为5天,而完全消耗臭氧层的初始时间为15天。本模型适合于阐明观测中严重臭氧消耗以及部分臭氧消耗开始和终止的原因。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

  • 来源
    《Atmospheric environment》 |2016年第5期|98-110|共13页
  • 作者单位

    Nanjing Univ Informat Sci & Technol, Key Lab Aerosol Cloud Precipitat, China Meteorol Adm, Nanjing, Jiangsu, Peoples R China|Heidelberg Univ, Interdisciplinary Ctr Sci Comp, Heidelberg, Germany;

    Heidelberg Univ, Inst Environm Phys, Heidelberg, Germany;

    Heidelberg Univ, Interdisciplinary Ctr Sci Comp, Heidelberg, Germany;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Ozone depletion; Halogen release; Boundary layer;

    机译:臭氧消耗卤素释放边界层;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号